440 Magnum Eemblems

[BadJoey]

Here is my problem . My car has a R/T hood on it (I'm guessing) from the 73 - 74 time . No holes to mount emblems , they had stick on . 440 only came in 71 and 70 . I bought new emblems with post . I can not just drill holes because you could not get to the back of the emblems . Did they change the braces on the underside of the hood after 71 or am I missing something . Please help .

[moparnut]

I don't know what they changed, but if it was me i would grind off the tabs on the emblems and get some 3m double sided tape instead of drilling holes

[Bullitt-]

you use barrel nuts

[BadJoey]

you use barrel nuts

Thanks Bulitt . Next question would be where do I find barrel nuts ?

[Bullitt-]

I find them around the corner at the local hardware store....before you drive across town looking PM your address & I'll send you some.

[acudanut]

you use barrel nuts

Yes, Barrel Nuts.  End of problem.  Any good hardware store has these.  Usually in drawers in automotive fasteners sections.

[67vertman]

Or....Roseville Moparts sells them as well.  He is a member here. 

http://www.rosevillemoparts.com/product_info.php/p/3-16-acorn-nut-fender-gill-side-markers-a-b-e-body/products_id/700

[Bullitt-]

Or....Roseville Moparts sells them as well.  He is a member here. 

http://www.rosevillemoparts.com/product_info.php/p/3-16-acorn-nut-fender-gill-side-markers-a-b-e-body/products_id/700

Afraid those are not barrel nuts...those, or something similar, holds fender emblems