Author Topic: Factory 360 With Roller Cams & 308 Heads (Read 736 times)

The Cuda Guy · « **on:** April 05, 2009 - 06:24:34 PM »

What years LA 360 had the roller cams and the 308 heads? Im thinking 91 & 92??? Thanks.

Don

DodgeFreak · « **Reply #1 on:** April 05, 2009 - 06:51:09 PM »

throttle body years. I think some 86s had the provisions for the rollers some were some not..but not 100percent on that.

The Cuda Guy · « **Reply #2 on:** April 05, 2009 - 09:32:40 PM »

Does anyone know what years we are talking about here??? Thanks.

Don

Chryco Psycho · « **Reply #3 on:** April 06, 2009 - 01:19:38 AM »

I have seen them as early as 87 -92

The Cuda Guy · « **Reply #4 on:** April 06, 2009 - 01:28:33 AM »

I have seen them as early as 87 -92

Thank you Neil I knew you would chime in soon enough!

Don

Chryco Psycho · « **Reply #5 on:** April 06, 2009 - 03:17:05 AM »

No Prob

moparmaniac59 · « **Reply #6 on:** April 06, 2009 - 06:32:52 PM »

Hey Don,
Looking for something to keep up with Stroker?? You might want to get two of them!!

Matt B.

moper · « **Reply #7 on:** April 06, 2009 - 07:16:23 PM »

87 was 318 only with TBI in cars. 88-91 318s and 360s had TBI and all were roller cams with LA heads. 92 started the Magnum series.

nivvy · « **Reply #8 on:** April 07, 2009 - 05:05:36 AM »

Hey Don,
Looking for something to keep up with Stroker?? You might want to get two of them!!

Matt B.

So when he puts a 360 in his cuda does that mean he will have a 383 hockey stripe on his car

Don will get his big inch stroker soon enough. it takes a long time to get where you want.. playing race car isnt cheap these days..