Author Topic: how to remove odo reset and clock knobs..... (Read 3469 times)

MEK-Dangerfield · « **Reply #1 on:** April 25, 2009 - 08:21:26 PM »

You need a small jewelers screw driver to get them off. DON'T lose those little screws!!

wally426ci · « **Reply #2 on:** April 25, 2009 - 10:22:53 PM »

son-of-a, good thing i didnt keep pulling...

RaptorF229 · « **Reply #3 on:** April 26, 2009 - 06:42:20 AM »

Pg classic and rt-eng have replacements if you need them.

bb71challenger · « **Reply #4 on:** April 26, 2009 - 10:04:21 AM »

You can just get one of those little kits with 6 screw drivers and a couple pair of small pliers for under 20 bucks. They come in handy from time to time.

Moparal · « **Reply #5 on:** April 26, 2009 - 10:08:33 AM »

The cost of those 2 screws is stupid for the size. I have been looking for mine for months holding back from spending 16 bucks for something that can be shipped just by the glue on the back of a stamp

bb71challenger · « **Reply #6 on:** April 26, 2009 - 10:14:22 AM »

I have a new set somewhere for my dash because mine were missing. I dont remember what size they are but I would be willing to bet a short trip to a watchmaker or even a jeweler that does work on watches just might yield the screws you need Alan. Might try that and see what happens.

MEK-Dangerfield · « **Reply #7 on:** April 26, 2009 - 01:20:08 PM »

I had to pay $8 for one of them little buggers.

wally426ci · « **Reply #8 on:** April 26, 2009 - 02:09:40 PM »

i knew i forgot something. i still need to get a watchmens screw driver...

VTMopar · « **Reply #9 on:** April 27, 2009 - 10:58:59 PM »

I just finished my Rally install -- and picked up a super nice used clock/speedo knob with the set screw for $10 from RTE. I don't know if they have any more.......

VT Mopar

Chryco Psycho · « **Reply #10 on:** April 28, 2009 - 12:56:05 PM »

they are actually a tube nut so I doubt a jeweller would have anything close

wally426ci · « **Reply #11 on:** April 28, 2009 - 12:59:22 PM »

if anyone is wondering, i need to pull the gauges b/c i still have a hair dryer smell with the car running. unplugging the tac at the coil wasnt enough, just digging deeper like chryco suggested..

cant wait to cruise, waiting to hear back on a local fender, should still be bringing the car to Carlisle i hope..... would like to have my dash and windshield... we will see....

MEK-Dangerfield · « **Reply #12 on:** April 28, 2009 - 06:55:53 PM »

Wally,

You want me to bring you that little screw driver? Here's another thought, new ceramic coated headers stink some when you first run the car. Didn't you recently put on new TTI's?

Mike

wally426ci · « **Reply #13 on:** April 28, 2009 - 07:02:17 PM »

i did, but i already ran them enough and remember the smell...... i just think i have bad electrical luck in prime cruising season. we do need to meet up though. i paid $2.99 for one of those stupid little screw-me drivers last night @ CVS....

i hope to ride soon. ive been dividing time between working on the Truck also.... so everything is demanding my attention right now.

Author Topic: how to remove odo reset and clock knobs..... (Read 3469 times)

wally426ci

how to remove odo reset and clock knobs.....

MEK-Dangerfield

Re: how to remove odo reset and clock knobs.....

wally426ci

Re: how to remove odo reset and clock knobs.....

RaptorF229

Re: how to remove odo reset and clock knobs.....

bb71challenger

Re: how to remove odo reset and clock knobs.....

Moparal

Re: how to remove odo reset and clock knobs.....

bb71challenger

Re: how to remove odo reset and clock knobs.....

MEK-Dangerfield

Re: how to remove odo reset and clock knobs.....

wally426ci

Re: how to remove odo reset and clock knobs.....

VTMopar

Re: how to remove odo reset and clock knobs.....

Chryco Psycho

Re: how to remove odo reset and clock knobs.....

wally426ci

Re: how to remove odo reset and clock knobs.....

MEK-Dangerfield

Re: how to remove odo reset and clock knobs.....

wally426ci

Re: how to remove odo reset and clock knobs.....