Engine bay question

[moparmaniac59]

I just pulled my motor and had the engine compartment painted. I noticed that there are two plastic or rubber material covers that cover a square shaped access hole that goes into the wheel well on each side of the lower engine compartment. I am missing one on the driver's side and the passenger side one is looking ratty. I was wondering the correct term for these are and where I could purchase a set of them?? Thanks guys!


                                              Matt B.

[Bullitt-]

Dave has you covered

http://www.rosevillemoparts.com/product_info.php/p/splash-shield-inner-fender-70-74-e-body/products_id/2297

[moparmaniac59]

That's the animal!!

Thanks Bullitt!!


                                             Matt B.

[DMZ73]

I have a spare metal cover or two, if that is what you are referring to.
Let me know.

Best,

Dan

[Bullitt-]

I have a spare metal cover or two, if that is what you are referring to.
Let me know.

Best,

Dan

Dan, I need a drivers passenger side cover.. PM sent.

Wade 

[shatar4]

I have a spare metal cover or two, if that is what you are referring to.
Let me know.

Best,

Dan

I don't think they are metal. The metal ones are in they front of they inner fender. The fabricones are in the back of the fenders.

[moparmaniac59]

I needed the plastic/rubber (non metal) ones. I ordered the splash shields from Rosemont Moparts.

                                  Matt B.