Lifter noise 318 Cui

News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: Lifter noise 318 Cui  (Read 3473 times)

    Offline Danishmopar

    • Jr. Member
    • **
    • Posts: 337
    • 70´ Challenger. Denmark, scandinavien.
      • Overhauling 70´Challenger
    Lifter noise 318 Cui
    « on: May 18, 2009 - 03:59:35 PM »


    Hi Guys...

    After 5 times i have startet my 70´ 318 engine it came up with what I think is a lifter noise from driver side top. Are there some adjustment opportunities.... I have startet the engine 5 times after its have stand in 5 years, the first times was there no noise.. It has new oil and filter

    I have not have the car out for a spind yet..

    Oil pressure 75psi at idle.

    Hope you guys can help me on track..

    Thanks...

    Logged
    Work and Supportet your forces at 821st Air Base Group. Thule AB, Greenland
    Pictures of My challenger: http://picasaweb.google.dk/dennisogkatja/Overhauling70Challenger#


    Offline Chryco Psycho

    • Administrator
    • C-C.com Guru
    • *****
    • Posts: 36620
    • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
    Re: Lifter noise 318 Cui
    « Reply #1 on: May 18, 2009 - 08:07:03 PM »
    no adjustment
     check for a plug inserted up to the left side lifter bank above the crank
    Logged

    Challenger - You`ll wish You Hadn`t

    Offline Danishmopar

    • Jr. Member
    • **
    • Posts: 337
    • 70´ Challenger. Denmark, scandinavien.
      • Overhauling 70´Challenger
    Re: Lifter noise 318 Cui
    « Reply #2 on: May 19, 2009 - 04:45:53 AM »


    Hi Chryco :o)

    Can you explain more af that  :clueless:.. I have a bolt plugget in on left side over the crank..

    Thanks  :thumbsup:
    Logged
    Work and Supportet your forces at 821st Air Base Group. Thule AB, Greenland
    Pictures of My challenger: http://picasaweb.google.dk/dennisogkatja/Overhauling70Challenger#

    Offline 426HEMI

    • Sr. Resident
    • ******
    • Posts: 5187
    • My M46 Barracuda! Member Since:October 01, 2005
    Re: Lifter noise 318 Cui
    « Reply #3 on: May 19, 2009 - 06:37:48 AM »
    The valve train in hydrolic lifter set up is not adjustable.  They are self adjusting so to speak.  Hope that helps some.
    Logged
    Got a pretty good start on my M46 optioned Barracuda restoration but now it is on hold till I can gather more funds.  Still need a few parts for it.  SIU Graduate 75 AAS Automotive Tech, 94 BS Advanced Tech Studies, 1997 MSED Workforce Education and Development

    1970 M46 Barracuda
    1998 Dodge Darango

    Gordon

    Offline Danishmopar

    • Jr. Member
    • **
    • Posts: 337
    • 70´ Challenger. Denmark, scandinavien.
      • Overhauling 70´Challenger
    Re: Lifter noise 318 Cui
    « Reply #4 on: May 19, 2009 - 08:26:17 AM »


    Thanks Guys  :cheers:

    I mean that Chryco write, with the plug inserted up to the left side lifter bank ?

    Will it be possible to take the lifters up with a magnet...

    Thanks guys  :thumbsup:

    Logged
    Work and Supportet your forces at 821st Air Base Group. Thule AB, Greenland
    Pictures of My challenger: http://picasaweb.google.dk/dennisogkatja/Overhauling70Challenger#

    Offline Changin Gears

    • Sr. Member
    • ****
    • Posts: 1011
    Re: Lifter noise 318 Cui
    « Reply #5 on: May 19, 2009 - 08:38:15 AM »
    I would run it for a while, get some heat into it.  It is common for lifters to make some noise after not running for long periods of time.
    Logged


    The goal never changes - Stop the 60' timer with your back tires

    Offline Danishmopar

    • Jr. Member
    • **
    • Posts: 337
    • 70´ Challenger. Denmark, scandinavien.
      • Overhauling 70´Challenger
    Re: Lifter noise 318 Cui
    « Reply #6 on: May 19, 2009 - 12:04:17 PM »


    Hi  :2thumbs:

    I startet it up again today and took her out for a littel spind. And it sounds better. I will chance the oil and filter again, and see how "she" runs after...

    Thanks Guys..
    Logged
    Work and Supportet your forces at 821st Air Base Group. Thule AB, Greenland
    Pictures of My challenger: http://picasaweb.google.dk/dennisogkatja/Overhauling70Challenger#

    Offline Chryco Psycho

    • Administrator
    • C-C.com Guru
    • *****
    • Posts: 36620
    • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
    Re: Lifter noise 318 Cui
    « Reply #7 on: May 19, 2009 - 12:16:03 PM »
    yes lifters can be changed without removing the intake using a magnet if nessisary
     I hope everything is OK
    Logged

    Challenger - You`ll wish You Hadn`t

    Offline 426HEMI

    • Sr. Resident
    • ******
    • Posts: 5187
    • My M46 Barracuda! Member Since:October 01, 2005
    Re: Lifter noise 318 Cui
    « Reply #8 on: May 19, 2009 - 02:19:06 PM »
    Small blocks do not like to site very long.  Lifters will colapse at times when they site.  Some times it is hard to get the oil back into them but it should be ok.  Hope it does ok.
    Logged
    Got a pretty good start on my M46 optioned Barracuda restoration but now it is on hold till I can gather more funds.  Still need a few parts for it.  SIU Graduate 75 AAS Automotive Tech, 94 BS Advanced Tech Studies, 1997 MSED Workforce Education and Development

    1970 M46 Barracuda
    1998 Dodge Darango

    Gordon

    Offline JayBee

    • Resident
    • *****
    • Posts: 2477
    Re: Lifter noise 318 Cui
    « Reply #9 on: May 19, 2009 - 07:22:39 PM »
    This may be way out in left field but are you sure it's a lifter? I had a noise coming from the left side of my 318 once and swore it was a bad lifter. The noise turned out to be an exhaust leak that went away after I re-torqued the bolts.   :2cents:
    Logged
    John

    1970 Barracuda convertible
    2014 Toyota Avalon

    Offline MEK-Dangerfield

    • C-C.com Expert
    • ********
    • Posts: 20946
    • I don't get NO respect! Member since 1/25/2002
    Re: Lifter noise 318 Cui
    « Reply #10 on: May 19, 2009 - 07:26:10 PM »
    Quote from: JayBee on May 19, 2009 - 07:22:39 PM
    This may be way out in left field but are you sure it's a lifter? I had a noise coming from the left side of my 318 once and swore it was a bad lifter. The noise turned out to be an exhaust leak that went away after I re-torqued the bolts.   :2cents:

    Great point. Even with a big block I was fooled once. A leak between the header flange and the heads sounded like a valve train problem to me at first too.    :banghead:
    Logged

    Mike

    1970 Challenger - SOLD
    2016 SXT+.  1 of 524 SXT+'s in Plumb-crazy for 2016.

    Offline The Cuda Guy

    • Support Our Troops
    • Resident
    • ****
    • Posts: 3899
    • Pearl Harbor, HI
      • C-C.com
    Re: Lifter noise 318 Cui
    « Reply #11 on: May 20, 2009 - 10:13:48 AM »
    Quote from: Chryco Psycho on May 19, 2009 - 12:16:03 PM
    yes lifters can be changed without removing the intake using a magnet if nessisary
     I hope everything is OK

    I have done this with Neils guidance, changed all the lifters....?  Never dawned on me that I might have a bad exhaust gasket!  I bought good exhaust gaskets and havent looked back since. 

    Don
    Logged
    The Cuda Guy Project is on going!

    Member Since January 14, 2002

    Offline Danishmopar

    • Jr. Member
    • **
    • Posts: 337
    • 70´ Challenger. Denmark, scandinavien.
      • Overhauling 70´Challenger
    Re: Lifter noise 318 Cui
    « Reply #12 on: May 20, 2009 - 04:06:42 PM »


    HI guys..

    Thanks for all that respons  :2thumbs:

    Ï have changed the oil and filter and tightened the headders... And now she runs like a pussycat, It reallý helps.

    So can i always change the lifters in the winter months...
     
    Thanks Guys

     :cheers:
    Logged
    Work and Supportet your forces at 821st Air Base Group. Thule AB, Greenland
    Pictures of My challenger: http://picasaweb.google.dk/dennisogkatja/Overhauling70Challenger#

    Offline dodge freak 2

    • Full Member
    • ***
    • Posts: 825
    Re: Lifter noise 318 Cui
    « Reply #13 on: May 20, 2009 - 10:07:41 PM »
    No, you can swap lifters about as fast as an oil change..well one side.

    Remove valve cover..the 5 bolts holding the rocker shaft down, remove rocker shaft and arms. Then get a magnet flexible rod and pull each lifter out by the big holes between the push rods.

    I did mine during a cam swap and I had a lifter tray under the intake that needed to be pushed up while pulling each lifter.

    Be sure to break in the lifters like you would a new cam...then again you might as well stick a new camshaft in once you get all the lifters out...

    Guess wait until winter  :icon16:   
    Logged

    Offline Danishmopar

    • Jr. Member
    • **
    • Posts: 337
    • 70´ Challenger. Denmark, scandinavien.
      • Overhauling 70´Challenger
    Re: Lifter noise 318 Cui
    « Reply #14 on: May 23, 2009 - 04:38:05 PM »


    HI...


    The lifters are in the shop, ready the change...

    Thanks  :cheers:
    Logged
    Work and Supportet your forces at 821st Air Base Group. Thule AB, Greenland
    Pictures of My challenger: http://picasaweb.google.dk/dennisogkatja/Overhauling70Challenger#
    Pages: [1]
    « previous next »