Author Topic: 727 to 340 support strut question  (Read 762 times)

Offline nick68

  • Jr. Member
  • **
  • Posts: 135
727 to 340 support strut question
« on: May 26, 2009 - 12:47:22 PM »
When I seperated the engine from the trans i bagged and tagged a support rod going from the trans to the block. I have never been able to figure out where it goes back... Anybody have a pic or good description.  Thnx
"Did I mention I hate sanding ? "




Offline Moparal

  • Permanent Resident
  • *******
  • Posts: 13085
Re: 727 to 340 support strut question
« Reply #1 on: May 26, 2009 - 03:14:18 PM »
Both sides of the block and just below the freeze plugs is a threaded hole. Then on the very front of the bellhousing where the dust shield goes, is the other place it bolts to. One on each side :2thumbs:

Offline tactransman

  • Sr. Resident
  • ******
  • Posts: 5401
  • 1973 Challenger- Member here since April 14, 2006
Re: 727 to 340 support strut question
« Reply #2 on: May 26, 2009 - 07:28:11 PM »
I tried to find a pic but I cannot find one. :pullinghair:
Terry-tactransman 
Torqueflite/Automatic Transmission Specialist
Union, Mo.
Give a man a fish and he eats for a day,teach him to fish and he eats for a lifetime.

Offline nick68

  • Jr. Member
  • **
  • Posts: 135
Re: 727 to 340 support strut question
« Reply #3 on: May 27, 2009 - 08:50:50 AM »
Both sides of the block and just below the freeze plugs is a threaded hole. Then on the very front of the bellhousing where the dust shield goes, is the other place it bolts to. One on each side :2thumbs:

AAAAAHHHHHHH ! The mystery is solved. :woohoo:  Thanks a bunch.
"Did I mention I hate sanding ? "