News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: Bent or offset rear hanger?  (Read 564 times)

    Offline Chlngrcrzy

    • Sr. Member
    • ****
    • Posts: 1410
    Bent or offset rear hanger?
    « on: May 28, 2009 - 12:00:50 AM »
    Check this out, is this bent or is it offset? I have seen some that are sold that are 1" offset, and i don't know if this is an lod one or not. I am going to have to do some serious measuring, i guess. :clueless:
    Logged


    Offline Chryco Psycho

    • Administrator
    • C-C.com Guru
    • *****
    • Posts: 36620
    • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
    Re: Bent or offset rear hanger?
    « Reply #1 on: May 28, 2009 - 02:30:31 AM »
    that looks bent to me
    Logged

    Challenger - You`ll wish You Hadn`t

    Offline dutch

    • Sr. Resident
    • ******
    • Posts: 6944
    Re: Bent or offset rear hanger?
    « Reply #2 on: May 28, 2009 - 04:32:46 AM »
     :iagree:     
    Logged
    *** Bart ***

    Offline Chlngrcrzy

    • Sr. Member
    • ****
    • Posts: 1410
    Re: Bent or offset rear hanger?
    « Reply #3 on: May 28, 2009 - 08:08:49 PM »
    So hears the deal. I measured my axle, center to center on the leaf springs(on the axle) it measured 46". Measured the car where the front hangers attache, and it only measures 45", center to center. No wonder the hangers are bent a bit. So what the heck is going on.  :clueless:
    Logged

    Offline vinb

    • Resident
    • *****
    • Posts: 2163
    Re: Bent or offset rear hanger?
    « Reply #4 on: May 28, 2009 - 08:32:22 PM »
    Send the springs to a shop and get them reconditioned , new bushings would be in order also.. :thumbsup:
    Logged

    Alaskan_TA

    • Guest
    Re: Bent or offset rear hanger?
    « Reply #5 on: May 28, 2009 - 08:59:14 PM »
    E-Body rear frames are not parallel, neither are the rear springs.

    Your front hanger is bent.
    Logged
    Pages: [1]
    « previous next »