1/4 glass installed pics?

[wagesofsin]

can anyone lend me a hand here. went to put my 1/4 glass back in, and i found all the parts(i think). just cant figure the bar and bushing deal out. i just need to see the regulator to the actual window please.got any pics?

thanks.

[kmyles]

i think I have mine in right but I wouldn't mine seeing some pics as well...

[wagesofsin]

i have the whole magilla still in the 'cuda. i checked it out tonight but couldnt get any good shots. i will tomorrow when i can rig up some lighting.
its a surprisingly gravy set up.

[wagesofsin]

heres some pics of the drivers side installed. i dont know if youll be able to make out whats what. it was a bear to shoot in the holes to see. but i layed out the passenger side just like it actually installs so you can get an idea of the layout. hope this helps anyone. it was a learning experiance for me, thank goodness i had the 'cuda to referance.

if i knew how to draw on photos like some folks here, id make a little guide.
bottom retainer

sideways photo of everything in

top view

arm bushing attached to actual glass carrier

layed out so you can see the attachments


this is how it will sit installed.

[kmyles]

Cool thanks for the pics One question how does the bolt with spring and retainer assemble through the window? Got any pics of that close up???

[wagesofsin]

it screws in just like the other one. i cant get any pics of that till i yank the 'cuda away from the wall. then i can shoot through where i removed the quarter!

[kmyles]

My bottom bolt dosn't have a spring and that's what's throwing me for a loop. The top does have spring

[wagesofsin]

on the installed pic, tell me which one has you confused. i put both sides in as you see and they function fine. although they may not be correct. the one top black bushing is spring loaded on mine.(the one across from the bushing in the arm itself)
thats all.

[kmyles]

"the one top black bushing is spring loaded"

This is the one I'm confused on, where does the spring fit in???

Thanks for all the help wages!

[wagesofsin]

i will try and get a pic of it tomorrow, its hard to explain on here. 
and dont thank me, i havent done anything special. thats just how it is around here. hopefully i can see what you need and put it into pics and words.

 

[wagesofsin]

actually look at this, this will help.

[kmyles]

 

I don't see the spring on bolt

[Moparal]

The very first bolt on the slider with the plastic you see.  The spring is behind that bolt and infront of the plastic slide

[BruteForce]

if i knew how to draw on photos like some folks here, id make a little guide.

Type the photo file name at the file prompt. It should display on the screen. Right click on the image, select "open with", then "Paint". That's Microsoft's paint program. You can do some simple line drawing with it.

[Alaskan_TA]

This may help;