Author Topic: MAS Racing Products going out of business.  (Read 21189 times)

Offline 72bluNblu

  • Sr. Member
  • ****
  • Posts: 1836
Re: MAS Racing Products going out of business.
« Reply #15 on: June 08, 2009 - 01:33:27 AM »
Try here, showed up on Moparts

http://transamcuda.com/spoilers.htm


Won't fit a Challenger because of the turn signal pods. Otherwise I might get one.

I still want to keep it in case I use it someday, just like the cheap aluminum rear window louvers that I had on the back.


That's cool, I know I'd want to hold onto it too. But if you ever want to part with it or those cheap aluminum louvers, let me know and I'll take them off your hands!  :bigsmile:




Offline OzCuda

  • Jr. Member
  • **
  • Posts: 479
Re: MAS Racing Products going out of business.
« Reply #16 on: June 08, 2009 - 09:00:00 PM »
Certainly seems to be enough interest in the MAS style spoilers here.  Maybe if someone still has one in good shape, there might be enough people willing to buy if it was copied in carbon fibre or similar???  Would cost more but could justify a small-run/group buy ;)
'70 Barracuda

Offline Morris'_Mopars

  • Sr. Member
  • ****
  • Posts: 1173
Re: MAS Racing Products going out of business.
« Reply #17 on: June 10, 2009 - 09:55:01 PM »
I am not a fan at all of MAS. Cheap products... :2cents: :woo:
Morris' Mopars LLC
Raymond, Illinois
Mopar performance at affordable prices.

Offline JoltinJoe

  • Full Member
  • ***
  • Posts: 617
  • BALZ TO THE WALZ MAN
Re: MAS Racing Products going out of business.
« Reply #18 on: June 10, 2009 - 10:16:19 PM »
I have one of those front spoilers that I had on my challenger. I mounted it so that the chin started at the valance opening then the sides were mounted behind the turn signals. It puts it at a good angle and doesn't hang down so low.

 :useless:
HIS: '68 GMC 3/4 ton pick-up truck, '73 Barracuda, '87 Firebird, '01 Jeep Cherokee and finally a '70 Barracuda Convertible!
HERS: 1980 Toyota Starlet, 1995 SAAB 9-5 and then '01 SAAB 9-3 and currently '08 Saab 9-3 convertible!
NEXT IS MINE: purple 2010 Dodge Challenger!!!

Offline DrChopper

  • Newbie
  • *
  • Posts: 1
Re: MAS Racing Products going out of business.
« Reply #19 on: August 02, 2009 - 05:13:43 PM »
I've heard that MAS Racing has gone out of business.  Although I don't know for sure if they have, all of my phone calls and emails go unanswered.  We made alot of fiberglass parts for MAS Racing, and if they're gone, I am going to start liquidating the parts we have in inventory.  I know that they had multiple glass shops doing parts for them, I can't speak for the quality of the other shops, but I feel that our quality is close to tops in this business.  If you need parts, give me your part number, I just might have it.

moparniac

  • Guest
Re: MAS Racing Products going out of business.
« Reply #20 on: August 02, 2009 - 05:26:12 PM »
JUNK!

Offline HP2

  • Resident
  • *****
  • Posts: 4478
Re: MAS Racing Products going out of business.
« Reply #21 on: August 04, 2009 - 09:00:41 AM »
MAS does make inexpensive fiberglass parts. That means they are not going to fit perfect, they are going to need finish work to look nice, they will never be an OEM, restoration grade product, and their attaching methods are not remotely close to original. However, if you want an inexpensive piece that looks very similar to factory peices at a quarter of the cost and don't mind doing some work to get them finished, they are a fair value.

I've picked up fiberglass from a number of vendors. MAS does tend to be one of the lower quality suppliers out there, but that is, IMO, reflected in their prices as well. The differences between a $45 spoiler and a $200 spoiler better be significant, and in the case of MAS, it is.

Offline IMNCARN82

  • Resident
  • *****
  • Posts: 3547
  • LeDZeP
Re: MAS Racing Products going out of business.
« Reply #22 on: August 04, 2009 - 09:48:40 AM »
O.K. O.K.    the MAS stuff is pretty much junk. I've worked with fiberglass for 20 yrs.I have the spoiler your talking about.    Since a lot of people would like them.And they could be better very easily.I'm going to make a mold of mine and make some better ones.     The problem is in the lamination. Too hot...Too quick.  Too  cheap!   It would not take much to do.    But I'm in limbo right now...No real place to live.Getting a shop soon.Can't get to it for awhile. But I WILL!    Rob
'73 340 5 speed,RMS,BAER,... "Supercuda" (O[   ]||||[   ]O)  
'69 Dodge Charger 383,Auto                  (OiiiiiiiiiiIiiiiiiiiiiO)
13' Challenger R/T BlacktoP  6spd. (OO________OO)
71' Demon
75' Duster
87' Conquest TSI
56' Plaza
Boulder CO
Robert    "cuda bob"

Offline ChallengerGary

  • Resident
  • *****
  • Posts: 3040
    • Challenger Gary
Re: MAS Racing Products going out of business.
« Reply #23 on: August 04, 2009 - 11:28:49 AM »
O.K. O.K.    the MAS stuff is pretty much junk. I've worked with fiberglass for 20 yrs.I have the spoiler your talking about.    Since a lot of people would like them.And they could be better very easily.I'm going to make a mold of mine and make some better ones.     The problem is in the lamination. Too hot...Too quick.  Too  cheap!   It would not take much to do.    But I'm in limbo right now...No real place to live.Getting a shop soon.Can't get to it for awhile. But I WILL!    Rob
Rob,  what spoiler do you have that you will start reproducing?
2006 Dodge Ram 1500 Mega Cab 5.7 Hemi

1972 Dodge Demon - "new" project

AND TOO MANY OTHER MOPARS THROUGH MY HANDS TO COUNT

Offline TiMopar

  • Jr. Member
  • **
  • Posts: 16
Re: MAS Racing Products going out of business.
« Reply #24 on: August 04, 2009 - 01:16:51 PM »
I would buy one of the spoilers in OzCudas pictures if available.....

Offline Super Blue 72

  • Permanent Resident
  • *******
  • Posts: 12711
  • "Big 'n Little" Member since 8/9/05
    • Phil's Super Blue '72
Re: MAS Racing Products going out of business.
« Reply #25 on: August 05, 2009 - 02:54:17 AM »
 :popcorn:
1972 Dodge Challenger Rallye 340, AT, Code TB3=Super Blue, SBD=8/17/1971.  Yes, a Rallye without the fender louvers from the factory because of the body side molding option.

Pic #2 and 3 of my ARII 1/24 scale model car 

Phil in New England-Massachusetts  Always thank God for what you have!

http://www.cardomain.com/ride/456046/1972-dodge-challenger

Offline IMNCARN82

  • Resident
  • *****
  • Posts: 3547
  • LeDZeP
Re: MAS Racing Products going out of business.
« Reply #26 on: August 06, 2009 - 10:08:54 PM »
Rob,  what spoiler do you have that you will start reproducing?

It's the MAS one pictured on the first post.I'm making two types.One similar to the MAS one...But done correctly.  And another larger one. It will be a little while before I can finish the patterns.Then a quick mold.     They will be "cost-effective" !!   Rob.
'73 340 5 speed,RMS,BAER,... "Supercuda" (O[   ]||||[   ]O)  
'69 Dodge Charger 383,Auto                  (OiiiiiiiiiiIiiiiiiiiiiO)
13' Challenger R/T BlacktoP  6spd. (OO________OO)
71' Demon
75' Duster
87' Conquest TSI
56' Plaza
Boulder CO
Robert    "cuda bob"

Offline 72bluNblu

  • Sr. Member
  • ****
  • Posts: 1836
Re: MAS Racing Products going out of business.
« Reply #27 on: August 06, 2009 - 10:49:13 PM »
It's the MAS one pictured on the first post.I'm making two types.One similar to the MAS one...But done correctly.  And another larger one. It will be a little while before I can finish the patterns.Then a quick mold.     They will be "cost-effective" !!   Rob.

And a bigger one too! Rob, you're my hero. Make sure you make one for me, 'cause I want one.  :bigsmile:

Offline PlumCrazyChris

  • Jr. Member
  • **
  • Posts: 456
    • Mopar Muscle Cars of Austin
Re: MAS Racing Products going out of business.
« Reply #28 on: November 21, 2012 - 12:35:38 PM »
Ever get some spoilers made?

 :popcorn:
PlumCrazyChris
Mopar Muscle Cars of Austin
Round Rock Tx
70 Challenger 5.7, A518, A/C
70 Challenger 340 convertible (Gone to Sweden)
68 Barracuda (sold it too)
www.mopar.org

Offline _Russ_

  • Not very family friendly!
  • Full Member
  • ***
  • Posts: 667
  • Chk Chk Boom!
    • Show Me How To Live
Re: MAS Racing Products going out of business.
« Reply #29 on: December 18, 2012 - 05:07:58 PM »


It's the MAS one pictured on the first post.I'm making two types.One similar to the MAS one...But done correctly.  And another larger one. It will be a little while before I can finish the patterns.Then a quick mold.     They will be "cost-effective" !!   Rob.


Anything ever eventuate from this?