70 Challenger A pillar interior pieces

[KNOT0623]

Anyone have a pair in good condition. Any color!!!!   Looking for the final pieces to finish the project.

Thanks
Russ
 

[R/T hedkace]

 Hey Russ, I'm pretty sure that I possibly have those pieces at home.
Sit tight. I'll check after work.

                                            Jeff

[KNOT0623]

cool thanks!!!!

[R/T hedkace]

 OK Russ, I jumped into one of my sheds and was able to find a few......




 What were the differences in years?
I do remember the 71 being different and a one year only thing, but I am not familiar with the other years   
Thanks 

 Also I have to figure out which ones came off of my Chally too 
Though I may have them put aside somewhere else possibly 
I'm gonna have to do some more digging I guess 

[KNOT0623]

Hey Jeff

I am not sure of the differences either , but i need both sides for my car.  Do you have any in great shape without cracks or gouges.  and are all there..no pieces missing?

Thanks!!!!
Russ

[R/T hedkace]

 Russ, I just went into one of the sheds, and pulled them out real quick.
I'm not down in the garage anymore, but I'll be down there after work tomorrow doing some welding on the Chally, so I'll clean them up and get a better look then 

                               


 Also, if anyone can chime in on the differences it would be greatly appreciated.
Thanks all 

                                   Jeff

[moparclown]

Hi guys
What I have learned so far is that there is a hard plastic version(very brittle) and a version in plastic thats like the door panels.Now I could be wrong about this as far as years go,but I think I got the hard plastic style from my 70 A66 car?Not that that makes a big difference but the car was an early build car(10/69)remember this is just my two cents on this and not written in stone.
                                                Doug

[quapman]

As I recall, the screw holes are in different places for different years, too. I think the 70-71's had two holes each.

[R/T hedkace]

 Thanks Doug and Steve 

 I'll look for those differences when I get home today 

[KNOT0623]

THANKS GUYS!!!!

[R/T hedkace]

Ok......I ended up getting a bit mangled tonight, instead of welding the Chally.........nothing new   
 But, while down there, we figured out that the A pillars with two screw holes are for a 70, and the ones for a 72 and above only have one hole.
Can anyone verify these facts??
Thanks 

[KNOT0623]

anybody?

[KNOT0623]

Can anybody confirm?

[quapman]

I'd give it a 90% shot that the early ones had two holes.

Jeff, the earlier (lower) part number should tell the tale!

Not sure about date codes.

[KNOT0623]

Hey Jeff

I really need the pass side mint.  But i will gladly take both.

Thanks
Russ