new MP valve covers, how about pcv valves.

News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: new MP valve covers, how about pcv valves.  (Read 3329 times)

    Offline Danishmopar

    • Jr. Member
    • **
    • Posts: 337
    • 70´ Challenger. Denmark, scandinavien.
      • Overhauling 70´Challenger
    new MP valve covers, how about pcv valves.
    « on: June 18, 2009 - 01:47:56 PM »


    Hi guys..

    I got me a new set of MP valve covers for 70´ 318 cui. But how abot the pcv system ?. are there a system there fit the covers and the MP aircleaner baseplate...

    Tired of the engine smell in the car  :eek4:

    Thanks Guys.
    Logged
    Work and Supportet your forces at 821st Air Base Group. Thule AB, Greenland
    Pictures of My challenger: http://picasaweb.google.dk/dennisogkatja/Overhauling70Challenger#


    Offline HP2

    • Resident
    • *****
    • Posts: 4478
    Re: new MP valve covers, how about pcv valves.
    « Reply #1 on: June 18, 2009 - 02:16:38 PM »
    You have a few options. Mopar makes a valve cover accessory kit that has grommet, caps, and bolts to do this. Get them from any Dodge dealer or Mopar Performance supplier.

    Another option is to drill out one of the circular blanks cast in the cover to fit a grommet of your choosing.

    Third option is to replace one of the twist on caps with a grommet to hold the pvc. A factory big block valve cover pvc grommet works well in that hole. Stateside we have universal grommets available at part stores to do this trick. Might check with a locally part place and see if there is something close.
    Logged

    Offline MEK-Dangerfield

    • C-C.com Expert
    • ********
    • Posts: 20946
    • I don't get NO respect! Member since 1/25/2002
    Re: new MP valve covers, how about pcv valves.
    « Reply #2 on: June 18, 2009 - 03:03:20 PM »
    If you bought a set of the cast aluminum covers, you can punch out one of the circle-like areas for the PCV valve. I know it doesn't look like it, but those holes just punch out.


       Mike
    Logged

    Mike

    1970 Challenger - SOLD
    2016 SXT+.  1 of 524 SXT+'s in Plumb-crazy for 2016.

    Offline Danishmopar

    • Jr. Member
    • **
    • Posts: 337
    • 70´ Challenger. Denmark, scandinavien.
      • Overhauling 70´Challenger
    Re: new MP valve covers, how about pcv valves.
    « Reply #3 on: June 18, 2009 - 04:37:31 PM »


     :cheers:

    Are the posible to get a carburator base plate with hose barb from the pcv valve, or should it run to the carburator...

    How will the pcv valve setup works, Pcv valve in the one cover and a breater in the other one ?

    Thanks Guys

    Logged
    Work and Supportet your forces at 821st Air Base Group. Thule AB, Greenland
    Pictures of My challenger: http://picasaweb.google.dk/dennisogkatja/Overhauling70Challenger#

    Offline The Cuda Guy

    • Support Our Troops
    • Resident
    • ****
    • Posts: 3899
    • Pearl Harbor, HI
      • C-C.com
    Re: new MP valve covers, how about pcv valves.
    « Reply #4 on: June 18, 2009 - 05:06:51 PM »
    Bro, I improvised a PCV system using sepcters PCV, I had to find a gromet to fit the PCV and had to use a large hose and use two hoses to connect it to the carb, like a step system large hose sealed to a smaller one that fits into the carb.  Here is a pic of my set up.

    Don
    Logged
    The Cuda Guy Project is on going!

    Member Since January 14, 2002

    Offline MEK-Dangerfield

    • C-C.com Expert
    • ********
    • Posts: 20946
    • I don't get NO respect! Member since 1/25/2002
    Re: new MP valve covers, how about pcv valves.
    « Reply #5 on: June 18, 2009 - 06:38:23 PM »
    Quote from: Danishmopar on June 18, 2009 - 04:37:31 PM

     :cheers:

    Are the posible to get a carburator base plate with hose barb from the pcv valve, or should it run to the carburator...

    How will the pcv valve setup works, Pcv valve in the one cover and a breater in the other one ?

    Thanks Guys

    Running the PCV to the carb is the best way to go. It can also be mounted to a carb spacer, or aftermarket intake manifold. Yes, the PCV valve is on one cover, and a breather would mount on the other cover.

    I'll post a pic of mine. The passenger's  valve cover has the PCV valve in the back, along with a grommet. The driver's cover has a breather in the front.
    Logged

    Mike

    1970 Challenger - SOLD
    2016 SXT+.  1 of 524 SXT+'s in Plumb-crazy for 2016.

    Offline vinb

    • Resident
    • *****
    • Posts: 2163
    Re: new MP valve covers, how about pcv valves.
    « Reply #6 on: June 18, 2009 - 09:30:37 PM »
    I used the factory pcv grommet and the mopar grommet stuck them together.
    And a breather on the opposite side. Don't forget to install the baffles....
    Logged

    Offline HP2

    • Resident
    • *****
    • Posts: 4478
    Re: new MP valve covers, how about pcv valves.
    « Reply #7 on: June 18, 2009 - 10:34:18 PM »
    Mopar accessory kit. Three grommets, a spare cap and chrome bolts.
    Logged

    Offline Danishmopar

    • Jr. Member
    • **
    • Posts: 337
    • 70´ Challenger. Denmark, scandinavien.
      • Overhauling 70´Challenger
    Re: new MP valve covers, how about pcv valves.
    « Reply #8 on: June 19, 2009 - 02:24:56 PM »

    Thanks Guys..

    Parts are orded, Thanks.

     :cheers:
    « Last Edit: June 21, 2009 - 09:23:06 AM by Danishmopar »
    Logged
    Work and Supportet your forces at 821st Air Base Group. Thule AB, Greenland
    Pictures of My challenger: http://picasaweb.google.dk/dennisogkatja/Overhauling70Challenger#

    Offline Danishmopar

    • Jr. Member
    • **
    • Posts: 337
    • 70´ Challenger. Denmark, scandinavien.
      • Overhauling 70´Challenger
    Re: new MP valve covers, how about pcv valves.
    « Reply #9 on: June 21, 2009 - 09:24:43 AM »


    Hey again Guys..

    Where can i get the right Pcv valve for the MP valve covers. Checket out summit, No Luck.

     :thumbsup:
    Logged
    Work and Supportet your forces at 821st Air Base Group. Thule AB, Greenland
    Pictures of My challenger: http://picasaweb.google.dk/dennisogkatja/Overhauling70Challenger#

    moparniac

    • Guest
    Re: new MP valve covers, how about pcv valves.
    « Reply #10 on: June 21, 2009 - 09:53:38 AM »
    Quote from: MEK-Dangerfield on June 18, 2009 - 03:03:20 PM
    If you bought a set of the cast aluminum covers, you can punch out one of the circle-like areas for the PCV valve. I know it doesn't look like it, but those holes just punch out.


       Mike

    yep  :working:
    Logged

    Offline 422STROKER

    • Sr. Resident
    • ******
    • Posts: 5386
    • Member Since 6/3/06
    Re: new MP valve covers, how about pcv valves.
    « Reply #11 on: June 21, 2009 - 12:49:50 PM »
    Quote from: Danishmopar on June 21, 2009 - 09:24:43 AM

    Hey again Guys..

    Where can i get the right Pcv valve for the MP valve covers. Checket out summit, No Luck.

     :thumbsup:

    Should be a regular parts store PCV for the grommet.

    Tom
    Logged
    Tom
    12.77 @ 108.87 15" Street Drag radial tires 3.23 gear

    moparniac

    • Guest
    Re: new MP valve covers, how about pcv valves.
    « Reply #12 on: June 21, 2009 - 01:21:11 PM »
    I just tapped a fiiting into my indy intake and ran braided line in there and made my own hole in the indy vc's....   :working:
    Logged

    Offline Danishmopar

    • Jr. Member
    • **
    • Posts: 337
    • 70´ Challenger. Denmark, scandinavien.
      • Overhauling 70´Challenger
    Re: new MP valve covers, how about pcv valves.
    « Reply #13 on: June 21, 2009 - 03:28:58 PM »


    Thanks Guys for all the respons.

    In my local parts store they only have parts for Nissan´s and Toyota´s Damm they Rizeres..

     :2thumbs:
    Logged
    Work and Supportet your forces at 821st Air Base Group. Thule AB, Greenland
    Pictures of My challenger: http://picasaweb.google.dk/dennisogkatja/Overhauling70Challenger#
    Pages: [1]
    « previous next »