Author Topic: bumper bumprettes (Read 1581 times)

mopower · « **on:** June 19, 2009 - 02:51:01 PM »

i replaced my 73 bumpers and braces with original 71 bumpers so i could suck up the bumpers and get rid of the hidious bumperettes. i just bought the chrome bumperettes to fill the void in my rear valance.anyhoo my question is is there a bracket underneath to help hold the new piece ? anyone got pics ? ill put you in my will. thanx steve

Slotts · « **Reply #1 on:** June 19, 2009 - 02:59:45 PM »

Quote from: mopower on June 19, 2009 - 02:51:01 PM

ill put you in my will.

How long do I have to wait?

Yes, there are brackets for them. I will take a look when I get home.

That is the best statement I ever saw to get a fast response!

Slotts

Slotts · « **Reply #2 on:** June 19, 2009 - 04:32:00 PM »

Ok, here is a picture of them...

Slotts

Katfish · « **Reply #3 on:** June 19, 2009 - 05:00:03 PM »

I need those also, anyone repoducing them?

mopower · « **Reply #4 on:** June 19, 2009 - 05:37:38 PM »

thanx for the response slotts, appreciate it, got an extra pair ?

E-Body Products · « **Reply #5 on:** June 19, 2009 - 11:34:35 PM »

I hope to have the reproductions in a few weeks. These will be exclusive to E-Body Products.

Thanks

Daniel
www.ebodyproducts.com
dj1965@ebodyproducts.com

LAA66 · « **Reply #6 on:** June 19, 2009 - 11:43:53 PM »

Slotts, are those the same mounts as a 70 Challenger?

Slotts · « **Reply #7 on:** June 20, 2009 - 04:20:46 PM »

Quote from: mopower on June 19, 2009 - 05:37:38 PM

thanx for the response slotts, appreciate it, got an extra pair ?

You're welcome. Yes, I found another original pair. I will send you a PM.

Quote from: LAA66 on June 19, 2009 - 11:43:53 PM

Slotts, are those the same mounts as a 70 Challenger?

Yes, 70 - 72.

Slotts

mopower · « **Reply #8 on:** June 22, 2009 - 09:31:56 PM »

hey slots i wonder if he has the rest of the attacing hardware? thanx again

E-Body Products · « **Reply #9 on:** June 22, 2009 - 09:40:26 PM »

The set of rear bumper guard brackets that I have are about 5/16" thick and have two horizontal slotted holes instead of vertical slots. Also, the bolt holes are offset as for right or left. Does anyone else have a set like these? I know they are for 70 challenger (They came off of the car) and the parts even have part numbers on them, so I know they aren't aftermarket or hand made.

Also, my set is over formed a little past 90� on the bend. The edges are also rounded.

I have not seen the thinner version like you have pictures of before. Which is more common and which would be preferred?

Any advice, as I am getting ready to make about 50 sets of these with a laser and press break.

Thanks,

Daniel
www.ebodyproducts.com
dj1965@ebodyproducts.com

mopower · « **Reply #10 on:** June 22, 2009 - 11:00:53 PM »

E-Body Products · « **Reply #11 on:** June 22, 2009 - 11:12:34 PM »

I will post some pictures in the morning...

Thanks,

Daniel

LAA66 · « **Reply #12 on:** June 22, 2009 - 11:30:59 PM »

I'm very interested

wally426ci · « **Reply #13 on:** June 22, 2009 - 11:32:33 PM »

E-Body Products · « **Reply #14 on:** June 22, 2009 - 11:58:52 PM »

Yea, they have the same profile and forms as the previous pics posted by slotts. They even have the joggle to compensate for the step in the bottom of the rear frame rail.

Daniel
www.ebodyproducts.com