Windshield Wipers

[DAWGS73]

I don't have anything here to compare these windshield wipers with, so I have to ask if the wipers on EBAY,

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=160346197906&viewitem=&sspagename=STRK%3AMEWAX%3AIT#ebayphotohosting

are correct for a 73 Barracuda? I have to find some somewhere before my car will even pass the state safety inspection.
Thanks in advance

[Bullitt-]

They look right to me & the seller has a bunch of Cuda parts.

[shadango]

Looks right to me too...look just like the ones on my 72.

[MEK-Dangerfield]

Weren't two speed and 3-speed wiper arms different? I don't know which these are.   

[DAWGS73]

Appreciate it guys.... I think I'll go for 'em and hope for the best.

[quapman]

Weren't two speed and 3-speed wiper arms different? I don't know which these are.   

The arms themselves are the same for both, it's the machanism inside the cowl that's different from 2 to 3 speed.

Those arms do look correct.

[MEK-Dangerfield]

The arms themselves are the same for both, it's the machanism inside the cowl that's different from 2 to 3 speed.

Those arms do look correct.

Thanks!! I remembered something being different between the two. 

[DAWGS73]

Probably a stupid follow up question; but that's pretty normal for me.
Are the wiper arms normally painted bright silver? Or black? Or??? I bought the ones I originally posted the question about, but they need some finish work.

[73Chally]

Should just be natural finish, but can be buffed.  Try acetone to get the paint off if that is what it is.

[quapman]

I usually clean them up with some lacquer thinner and a scotch-brite pad, then wipe with a clean paer towel and give them a good uniform finish with dry scotch-brite.

This is not to say that you'll get a concour correct finish using this method. It's just my process.