A833 Clutch Kit Recommendations?

[cwestra]

Getting ready to order a clutch kit for my 340 6-Pak.  Any recommendations on mfr. and model?  Should I replace the throw-out bearing or can I check to see if it needs it first?

Bushing or needle bearings for pilot?

[sleepychallenger]

i always replace the throw out bearing and a pilot bushing. not sure on brand/type clutch though

[Chryco Psycho]

I use Borg & Beck/ Long style McLeod clutches , I can get you part #s in a few days

[hemidude426ci]

When the Centerforce in my 'Cuda finally needs to be replaced I will absolutely throw a McLeod in there!

[Chryco Psycho]

either pilot brg is good , I generally try to use the bronze bushing if the hole is in the crank

[vinb]

Mcleod : 10.95

part # 360156 plate
part # 260121 disc

Check to make sure of your application....

[cwestra]

For street use, will a Mc Leod 75109 clutch & pressure plate kit work well for my AAR?

[Chryco Psycho]

I will have to look for that #

[cwestra]

When the Centerforce in my 'Cuda finally needs to be replaced I will absolutely throw a McLeod in there!

What don't you like about your Centerforce?

[ShelbyDogg]

Centerforce aor any diaphram style clutch will stick to the floor while power shifting.
Just happened to a friend of mine. He says he always shifted and drove it hard with no problems. We had a BBQ with all of our Mopar friends and many were doing burnouts in the street. He just watched and didn't want to "tear up" his car.

When he leaves, he can't help but punch it in 1st gear, then hit second. Guess what? Pedal stayed on the floor when he lifted his foot and at the same time the gas pedal got pushed in hard.    I yelled "Chevy Clutch"

[cwestra]

Centerforce aor any diaphram style clutch will stick to the floor while power shifting.
Just happened to a friend of mine. He says he always shifted and drove it hard with no problems. We had a BBQ with all of our Mopar friends and many were doing burnouts in the street. He just watched and didn't want to "tear up" his car.

When he leaves, he can't help but punch it in 1st gear, then hit second. Guess what? Pedal stayed on the floor when he lifted his foot and at the same time the gas pedal got pushed in hard.    I yelled "Chevy Clutch"

Are all Centerforce clutches diaphram type?

[ShelbyDogg]

Don't know unless you ask Centerforce themselves. You can tell it is a diaphram style if it has the small release fingers all the way around the center.

[Chryco Psycho]

every C Force clutch I have seen is a Diaphragm type

[cwestra]

I will have to look for that #

Anything on this P/N, CP?

[Chryco Psycho]

the kit you are looking at is just another Diaphragm clutch
 I would use a 360953 or 954 PP with a 260821 disc