So I am about at my wits end with the wiring. I think a color blind monkey on acid designed this wiring harness. I can get the dome light, parking and tail lights and headlights to work remapping the lights like this. Please note that I am converting to a standard 2 position pull light switch where 1st position is parking/tail lights, 2nd position turns the headlights on.
12 gauge black (B1): Batt in
pink (b2): parking lights (position 1)
light green: headlights (position 2)
black w/green stripe: parking light (position 1)
black w/ red strip: parking light (position 1)
This seems to work, although I cannot get my dash lights to work. The bulbs seems to be ok, and Installed the dimmer switch on exactly as it was. So I am at a loss. All the fuses are fine.