Author Topic: 440 Cast Heads and Cuda parts  (Read 891 times)

Offline KSpitz

  • Jr. Member
  • **
  • Posts: 31
440 Cast Heads and Cuda parts
« on: September 15, 2009 - 10:14:06 PM »
440 Cast heads (pair) with valves need to be cleaned up $75
Fibeglass hood with scoop for 70-74 Cuda Pin on in primer needs a little work ask for pics $125
Driver side door for a 70-74 cuda needs paint has glass ask for pics $75
340 hockey stick decal silver new $25
Small block motor mounts for a 70-74 cuda new $25
Driver side remote mirror chrome 70-74 cuda/challenger good for a driver not a show part 3.25" all parts perfect glass $75
Passenger Side Mirror Chrome 5" again good finish for driver not a show part perfect glass $50
Plastic racing bucket seats with covers pair $25
Original seat sliders for a 70-74 Cuda pair for $50
Pair of door handles for 70-74 cuda no locks driver not show part $30 for the pair.
Will consider offers.
All parts in Cincinnati Ohio buyer pays for shipping.
Will emails pictures of any and all parts   
« Last Edit: September 18, 2009 - 08:23:25 PM by KSpitz »




Offline ShelbyDogg

  • Sr. Resident
  • ******
  • Posts: 5007
Re: 440 Cast Heads and Cuda parts
« Reply #1 on: September 17, 2009 - 03:14:33 PM »
340 cuda hood emblems new $35
Will consider offers.
I could use the emblems, $35 shipped to 63021?

Looking for something that I might have to trade for them?
Rob

3 E-bodies, Megasquirt-1v3.0, Edelbrock Pro-Flo-1, Holley C950, FAST EZ-EFI; say no to carbs...yes to throttle bodies

My Pace Car restoration thread:
http://www.cuda-challenger.com/cc/index.php?topic=44869.0


Offline KSpitz

  • Jr. Member
  • **
  • Posts: 31
Re: 440 Cast Heads and Cuda parts
« Reply #2 on: September 17, 2009 - 04:01:41 PM »
Looks like shipping would be 4.80 usps. I am looking the chrome trim that goes on the back of the rear quarter for my 74 cuda I just need the passenger side.

Offline ShelbyDogg

  • Sr. Resident
  • ******
  • Posts: 5007
Re: 440 Cast Heads and Cuda parts
« Reply #3 on: September 17, 2009 - 04:12:43 PM »
I need that moulding too.

I'll PM you for your Paypal and the offer again.
Rob

3 E-bodies, Megasquirt-1v3.0, Edelbrock Pro-Flo-1, Holley C950, FAST EZ-EFI; say no to carbs...yes to throttle bodies

My Pace Car restoration thread:
http://www.cuda-challenger.com/cc/index.php?topic=44869.0


Offline Moparal

  • Permanent Resident
  • *******
  • Posts: 13085
Re: 440 Cast Heads and Cuda parts
« Reply #4 on: September 17, 2009 - 04:22:04 PM »
Plastic racing bucket seats with covers pair $25


Do you have a picture of this? And are the mounting holes in good shape. I am interested if I can see a picture. What brand?

Offline KSpitz

  • Jr. Member
  • **
  • Posts: 31
Re: 440 Cast Heads and Cuda parts
« Reply #5 on: September 17, 2009 - 05:09:00 PM »
Each seat has one insert missing so they only have 5> I'm not sure what brand they are as they came with the car. If you can give me an email address in a PM I will send pics. as my camera has to many pixels to down grade for this website.

Offline mrob

  • Jr. Member
  • **
  • Posts: 200
Re: 440 Cast Heads and Cuda parts
« Reply #6 on: September 17, 2009 - 08:18:19 PM »
Are the seat sliders for the drivers or the passenger side?

Offline KSpitz

  • Jr. Member
  • **
  • Posts: 31
Re: 440 Cast Heads and Cuda parts
« Reply #7 on: September 17, 2009 - 08:57:30 PM »
I have both sets of sliders.

Offline brads70

  • C-C.com Expert
  • ********
  • Posts: 18747
Re: 440 Cast Heads and Cuda parts
« Reply #8 on: September 17, 2009 - 10:44:49 PM »
What are the casting # on the 440 heads?
Brad
1970 Challenger 451stroker/4L60 auto OD
Barrie,Ontario,Canada
Proud to own one of the best cars ever made!!!!!

My restoration thread 
http://www.cuda-challenger.com/cc/index.php?topic=59072.0
 My handling upgrade post
http://www.cuda-challenger.com/cc/index.php?topic=73985.0

Offline KSpitz

  • Jr. Member
  • **
  • Posts: 31
Re: 440 Cast Heads and Cuda parts
« Reply #9 on: September 18, 2009 - 09:44:54 PM »
Casting number is 4006452

Offline brads70

  • C-C.com Expert
  • ********
  • Posts: 18747
Re: 440 Cast Heads and Cuda parts
« Reply #10 on: September 19, 2009 - 08:57:28 AM »
Thanks!
Brad
1970 Challenger 451stroker/4L60 auto OD
Barrie,Ontario,Canada
Proud to own one of the best cars ever made!!!!!

My restoration thread 
http://www.cuda-challenger.com/cc/index.php?topic=59072.0
 My handling upgrade post
http://www.cuda-challenger.com/cc/index.php?topic=73985.0