Parting out 74 Barracuda & 70 Challenger

[69bronzeT5]

well 69bronzeT5 I honestly dont think posting a thread trying to help out of members here is worthless. Sorry you feel that way

I don't think the thread is worthless....I'm just joking around with that smilie. All I was saying was I'd like to see pictures of the cars

[brotow]

I think I have what your looking for? Jason It's about 3" wide its thinner gauge metal right?

It's called rear cross member. It's the piece that goes between the bumper and the rear frame rails under the tail light panel. The bumper bracket bolts go through it and bolt to the end of the frame rails(i'll be needing them too,or I'll have to try and make some). The crosmember also has "extensions" on each end. I think the rear valance hangs from it.     

[moparnocar]

It's called rear cross member. It's the piece that goes between the bumper and the rear frame rails under the tail light panel. The bumper bracket bolts go through it and bolt to the end of the frame rails(i'll be needing them too,or I'll have to try and make some). The crosmember also has "extensions" on each end. I think the rear valance hangs from it.   

Yes I have this piece from a 72 cuda

[knk-mopar-parts]

Hey Jason Danny already paid for the parts and they are shipping out tommorow. The back half of the car isnt even swiss cheese because its not holy its gone. This one was real rusty.

[knk-mopar-parts]

Hey 69T5bronze I didnt notice the smilie, I will try and get some pics up. Thanks Kevin

[knk-mopar-parts]

Hey Danny the parts went out today via UPS. They should be there on Thursday. Thanks Kevin

[440WhiteBoy]

Some of you wanted to see pics of the underside of my 71 barracuda's roof.

You can see the original brown paint overspray with glue sprayed for the headliner pad. Notice how clean the steel is along with those spot welds!

these are older pics of the car in storage.
when I get her out I can take closer up pics of the ink stamp.

I will post the only pic of it I have now next.

[440WhiteBoy]

Pic of the Ink stamp ( 'USS' Steel )  right next to the center light brace.

*for larger viewing you can drag the pic with your mouse to your desktop;
 then click on that pic to then zoom in.

[dixiedog]

Got the parts Kevin, Thanks a bunch.  Danny

[383DART]

WOULD YOU HAVE A POWER STEERING COLUMN. I HAVE A 72 CUDA.

[gomangoRT/SE]

On each side where the seat belts come up from the floor, beneath the carpet were plastic pieces whre the seatbelts were fastened to the floor.   I think Im right about this.  Do you have them?  Or seatbacks, or front windshield?
gomango70@bellsouth.net

[Brant]

are your wheel well areas toast? I could use some patch work. thanks.

[mopar12372]

do you still have the steel plate that is welded to the top of the inner fender shock mount ? the brace is welded to the top of it.

[Migmaster]

Do you have the a pillars and the cross piece that goes on top between the a pillars? I don't know the correct name? I guess i need the entire structure around the windshield except the bottom cowl area.

[IMNCARN82]

Passenger fender?  Rear valence?  (cuda)  thanx