Author Topic: Moved My Parts for my Barracuda Today to my shed!  (Read 580 times)

Offline 426HEMI

  • Sr. Resident
  • ******
  • Posts: 5187
  • My M46 Barracuda! Member Since:October 01, 2005
Moved My Parts for my Barracuda Today to my shed!
« on: October 18, 2009 - 07:17:45 PM »
Got all my parts at my house now.  Was an adventure for sure.  Plenty of space for them all in there and a little room left over.   :woohoo: :woo: :woohoo: :bigsmile:
Got a pretty good start on my M46 optioned Barracuda restoration but now it is on hold till I can gather more funds.  Still need a few parts for it.  SIU Graduate 75 AAS Automotive Tech, 94 BS Advanced Tech Studies, 1997 MSED Workforce Education and Development

1970 M46 Barracuda
1998 Dodge Darango

Gordon




Offline cudadave72

  • Sr. Member
  • ****
  • Posts: 1857
  • you motorboatin sob!!!
Re: Moved My Parts for my Barracuda Today to my shed!
« Reply #1 on: October 18, 2009 - 07:21:07 PM »
 :woo: :woo: :woo: :woohoo: :2thumbs:
1972 BS23 H code Cuda, B5 blue, 340 streched to 416 cu in, 727 w/ 8 3/4 rear, 7.23 in the 1/8 mile and 11.38@117mph in the 1/4 on drag radials   Under restoration! Coming soon... 440cuin R3 Indy SMALL BLOCK monster!!!!


Offline 426HEMI

  • Sr. Resident
  • ******
  • Posts: 5187
  • My M46 Barracuda! Member Since:October 01, 2005
Re: Moved My Parts for my Barracuda Today to my shed!
« Reply #2 on: October 18, 2009 - 07:23:37 PM »
It was not fun seeing them fly out of the back of the truck but luckily they did not get hurt in any way shape or fashion.   :bigsmile: :2thumbs:

Now if I can get my garage built and my car here then I can get started on it!   :bigsmile: :woo: :woohoo: :woo: :woohoo:
Got a pretty good start on my M46 optioned Barracuda restoration but now it is on hold till I can gather more funds.  Still need a few parts for it.  SIU Graduate 75 AAS Automotive Tech, 94 BS Advanced Tech Studies, 1997 MSED Workforce Education and Development

1970 M46 Barracuda
1998 Dodge Darango

Gordon

Offline the_engineers

  • Resident
  • *****
  • Posts: 2639
  • Cheap, fast, reliable...pick 2
Re: Moved My Parts for my Barracuda Today to my shed!
« Reply #3 on: October 18, 2009 - 09:36:35 PM »
Well, if nothing else, you can start restoring the parts now.  :working:

Nothing worse than wishing the car was done while you take apart the steering column to clean and paint it.
Brooks

1971 'Cuda 360
2004 Infiniti G35 6-spd Coupe
2001 Toyota Solara Convertible
2002 GMC Savana 1500 Explorer Hightop Conversion
1972 Dodge Dart Swinger...keeping the Slant.  Rocking the turbos.

Offline 426HEMI

  • Sr. Resident
  • ******
  • Posts: 5187
  • My M46 Barracuda! Member Since:October 01, 2005
Re: Moved My Parts for my Barracuda Today to my shed!
« Reply #4 on: October 19, 2009 - 07:17:10 PM »
Wish it had been where I could have done more on my frame for my concrete but it was cold and windy and did not want to catch a cold.   :banghead:  I feel really good now with all of my car parts at the house so I can do things with them at least maybe.   :bigsmile:
Got a pretty good start on my M46 optioned Barracuda restoration but now it is on hold till I can gather more funds.  Still need a few parts for it.  SIU Graduate 75 AAS Automotive Tech, 94 BS Advanced Tech Studies, 1997 MSED Workforce Education and Development

1970 M46 Barracuda
1998 Dodge Darango

Gordon

wagesofsin

  • Guest
Re: Moved My Parts for my Barracuda Today to my shed!
« Reply #5 on: October 19, 2009 - 07:20:48 PM »
It was not fun seeing them fly out of the back of the truck but luckily they did not get hurt in any way shape or fashion.   :bigsmile: :2thumbs:

Now if I can get my garage built and my car here then I can get started on it!   :bigsmile: :woo: :woohoo: :woo: :woohoo:





????????  :dunno: :clueless: :dunno: :clueless: :1zhelp: :22yikes: :eek2:

Offline 426HEMI

  • Sr. Resident
  • ******
  • Posts: 5187
  • My M46 Barracuda! Member Since:October 01, 2005
Re: Moved My Parts for my Barracuda Today to my shed!
« Reply #6 on: October 19, 2009 - 07:26:03 PM »
I took out all of the parts that flew out and no scratches or dents in them.  So they were boxed up good.    :woohoo: :2thumbs: :bigsmile:
Got a pretty good start on my M46 optioned Barracuda restoration but now it is on hold till I can gather more funds.  Still need a few parts for it.  SIU Graduate 75 AAS Automotive Tech, 94 BS Advanced Tech Studies, 1997 MSED Workforce Education and Development

1970 M46 Barracuda
1998 Dodge Darango

Gordon

wagesofsin

  • Guest
Re: Moved My Parts for my Barracuda Today to my shed!
« Reply #7 on: October 19, 2009 - 07:27:29 PM »
was just curious buddy.

sounds like a kodak moment for sure.

Offline moparmaniac59

  • Resident
  • *****
  • Posts: 3772
  • Drive it like ya stole it!
Re: Moved My Parts for my Barracuda Today to my shed!
« Reply #8 on: October 19, 2009 - 07:48:00 PM »
Glad you got it all home in one piece Gordon. I would have liked to have been the lucky fella going down the highway behind you with Mopar parts flying out all over the pavement in front of me. Sounds like a good dream!! Like money falling out of the sky! :roflsmiley: :smilielol: :roflsmiley:
(I'd have helped you pick it up....really!)

                                            Matt B.
Matt

Offline 426HEMI

  • Sr. Resident
  • ******
  • Posts: 5187
  • My M46 Barracuda! Member Since:October 01, 2005
Re: Moved My Parts for my Barracuda Today to my shed!
« Reply #9 on: October 19, 2009 - 07:59:00 PM »
Hey Matt,  There was one guy stopped and ask if he could help but I already had all the help I needed to get the parts back on the truck and back on my way.  Several guys looked at them while I was driving to the house to see what I had also.   :bigsmile:
Got a pretty good start on my M46 optioned Barracuda restoration but now it is on hold till I can gather more funds.  Still need a few parts for it.  SIU Graduate 75 AAS Automotive Tech, 94 BS Advanced Tech Studies, 1997 MSED Workforce Education and Development

1970 M46 Barracuda
1998 Dodge Darango

Gordon