Great score today (a set of Ralley Wheels)

Author Topic: Great score today (a set of Ralley Wheels)  (Read 1849 times)

Offline 67vertman

  • Sr. Resident
  • ******
  • Posts: 5125
  • Member since 9-23-2005
Great score today (a set of Ralley Wheels)
« on: November 07, 2009 - 08:31:21 PM »
I came in from working on my car today, and I checked Craigs List and I saw an add for a set of Ralley rims 15x7 and 15x10 with BF Goodrich Radial T/A's 245/15 and 275/15, for $400. They looked good in the picture, as they came with caps and trim rings.  :2thumbs:

I went and looked at them and picked them up.   :jumping:  Good tread left, about half, and very nice looking driver quality finish.  They will clean up very nicely.

I can't wait to see them on my car.










Ron - Born and raised in Southern California

I got the 1970 Cuda, but still need the hot blonde to ride shotgun!

First car -1969 Road Runner 383 4sp

Current ride - 1970 Barracuda 440-6 4 sp Dana 60  (4:10)




Offline Moparal

  • Permanent Resident
  • *******
  • Posts: 13085
Re: Great score today (a set of Ralley Wheels)
« Reply #1 on: November 07, 2009 - 09:08:49 PM »
wow Ron, what is the back space on the 15x10's?   If they dont fit your car. Im interested in them :2thumbs:

Offline bb71challenger

  • Sr. Resident
  • ******
  • Posts: 6549
Re: Great score today (a set of Ralley Wheels)
« Reply #2 on: November 07, 2009 - 09:33:52 PM »
Super score! Congrats!   :clapping:
1971 Challenger (OO==== ====OO) getting close!
1970 Challenger (OO########OO) long ways off
*Brett*

Offline 67vertman

  • Sr. Resident
  • ******
  • Posts: 5125
  • Member since 9-23-2005
Re: Great score today (a set of Ralley Wheels)
« Reply #3 on: November 07, 2009 - 10:36:11 PM »
wow Ron, what is the back space on the 15x10's?   If they dont fit your car. Im interested in them :2thumbs:

Alan, I haven't gotten the chance to measure them yet.  The came off a 1970 Hemi Challenger, so I am hoping they fit my car.  If not, you get first dibbs on them.  :2thumbs:



Ron - Born and raised in Southern California

I got the 1970 Cuda, but still need the hot blonde to ride shotgun!

First car -1969 Road Runner 383 4sp

Current ride - 1970 Barracuda 440-6 4 sp Dana 60  (4:10)

Offline 6packCuda

  • Sr. Member
  • ****
  • Posts: 1932
  • Eagle, NE... Member since 11/17/06
Re: Great score today (a set of Ralley Wheels)
« Reply #4 on: November 08, 2009 - 07:44:17 AM »
Wow! That's a major score. I wonder where they found trim rings to fit the 15x10s correctly.
Dave

Offline BIGSHCLUNK

  • Sr. Resident
  • ******
  • Posts: 9341
  • Miss NIKKI - were you this hot at 48?
Re: Great score today (a set of Ralley Wheels)
« Reply #5 on: November 08, 2009 - 11:57:29 AM »
Ron, thats a great deal!! You done good!!!!!
70 Chally R/T Convertible- Yes she's really got a HEMI, no she's not a Charger!
                                             [o o o o]
                                                  OO
                                                  OO 
                                              [o o o o]
https://www.aanddtruckautoparts.com/
http://www.facebook.com/pages/A-D-Truck-and-Auto-Parts/67427352555?ref=hl

Offline Moparal

  • Permanent Resident
  • *******
  • Posts: 13085
Re: Great score today (a set of Ralley Wheels)
« Reply #6 on: November 08, 2009 - 12:16:13 PM »
Alan, I haven't gotten the chance to measure them yet.  The came off a 1970 Hemi Challenger, so I am hoping they fit my car.  If not, you get first dibbs on them.  :2thumbs:

Thanks Ron. Im setting here in Ontario at the airport, waiting for my flight to Mexico.  Come on by,  :bigsmile:  we could chat a bit :blah:

By the way, Im wasnt trying to pry that good deal out of your possession.  And it is a good deal.  I am pretty sure 10 inch wouldnt fit on barracudas. Challengers have a bigger area they fit in. They would rub the outter quarter panel wheel well lips.  I am doing another type of car.  But I hope the rims fit on your car with some jacker upper shocks :working: :burnout: I think the stock offeset is like 4.5 back space. They make a kit to move your springs in an inch or so, so you may be able to get them on there and keep a good stance on your car.

Offline bb71challenger

  • Sr. Resident
  • ******
  • Posts: 6549
Re: Great score today (a set of Ralley Wheels)
« Reply #7 on: November 08, 2009 - 12:25:39 PM »
Wow! That's a major score. I wonder where they found trim rings to fit the 15x10s correctly.

I noticed that too, the trim rings fit right. I guess the backspacing is stock in front which would guarantee them fitting inside the wheel lips but it sure would throw a lot of tire at the springs.
1971 Challenger (OO==== ====OO) getting close!
1970 Challenger (OO########OO) long ways off
*Brett*

Offline 67vertman

  • Sr. Resident
  • ******
  • Posts: 5125
  • Member since 9-23-2005
Re: Great score today (a set of Ralley Wheels)
« Reply #8 on: November 08, 2009 - 01:17:46 PM »
Alan, I know you are not trying to "steal my deal"  but if they don't work for me I will sell the 10"rs to you and get 8" rims.  :2thumbs:

I measured the back spacing and it is 6" inches, so, more than likely they are not going to fit my car.  :grinno:

Only time will tell, and I have none today.



Ron - Born and raised in Southern California

I got the 1970 Cuda, but still need the hot blonde to ride shotgun!

First car -1969 Road Runner 383 4sp

Current ride - 1970 Barracuda 440-6 4 sp Dana 60  (4:10)

Offline MEK-Dangerfield

  • C-C.com Expert
  • ********
  • Posts: 20946
  • I don't get NO respect! Member since 1/25/2002
Re: Great score today (a set of Ralley Wheels)
« Reply #9 on: November 08, 2009 - 02:42:46 PM »
Ron,

  You are going to have to move the rear springs in to get those 15X10's on there. Not a big job, but it depends on how bad you want 15X10's.   :grinyes:

Mike

1970 Challenger - SOLD
2016 SXT+.  1 of 524 SXT+'s in Plumb-crazy for 2016.

Offline 67vertman

  • Sr. Resident
  • ******
  • Posts: 5125
  • Member since 9-23-2005
Re: Great score today (a set of Ralley Wheels)
« Reply #10 on: November 08, 2009 - 04:58:02 PM »
Thanks Mike. I wasn't thinking of running 10 inch rims but I couldn't pass up the deal.  I may just buy some 8" rims and sell these to Alan.



Ron - Born and raised in Southern California

I got the 1970 Cuda, but still need the hot blonde to ride shotgun!

First car -1969 Road Runner 383 4sp

Current ride - 1970 Barracuda 440-6 4 sp Dana 60  (4:10)

Offline 67vertman

  • Sr. Resident
  • ******
  • Posts: 5125
  • Member since 9-23-2005
Re: Great score today (a set of Ralley Wheels)
« Reply #11 on: November 14, 2009 - 07:13:44 PM »
I decided to go with 15x8 with a 41/2” back spacing.  I got the Wheel Vintiques, but from Jegs, as they where over $20 dollars a piece cheaper and Jegs offers free shipping. 

I will still run the 275-15 BFGs though.



Ron - Born and raised in Southern California

I got the 1970 Cuda, but still need the hot blonde to ride shotgun!

First car -1969 Road Runner 383 4sp

Current ride - 1970 Barracuda 440-6 4 sp Dana 60  (4:10)

Offline Tonefiend

  • ▬▬▬▬ ♫ ♠ ♫ ▬▬▬▬
  • Full Member
  • ***
  • Posts: 987
  • '70 Challenger
    • Ian A. Guitars
Re: Great score today (a set of Ralley Wheels)
« Reply #12 on: November 15, 2009 - 09:37:25 PM »
I saw those on CL a while back. Congrats on the score.  Thats was a smokin deal.   I'm glad a forum member got them. If I had the scratch you wouldn;t have been so lucky!  :)

Offline wiging19

  • Full Member
  • ***
  • Posts: 601
Re: Great score today (a set of Ralley Wheels)
« Reply #13 on: November 15, 2009 - 09:47:39 PM »
I have a set of Rallye wheels 15X8's with a pair of 225's and 255's on them.  I'll sale the set to someone local around the Seattle area.  I bought a set of 17 inch wheels for the car and don't expect to go back to 15's.  I also have the original rims 14's for a 1970 convertible and hub caps.  I'm thinking of just scraping them with the original style rear axle.  Don't get excited it isn't a dana or 8 3/4 rear.   If anyone local is interested we can talk about other parts I have laying around or hopefully this year will have available.