Throttle bracket and spring

[kmyles]

looking for  a throttle bracket and return spring for a 383 big block. I have a throttle bracket for a small block if someone is interested in a trade.

[oldkimmer]

..........I should have a couple..........might have a spring..............kim........

[Moparal]

Don't I owe you for a package that got lost in the mail somewhere?  It never came back here.  Anyways, I have that bracket for free to you if you want it.  I am sorry about the other item. Hopefully this would make up for it

[kmyles]

Thanks Santa ...I mean Al. I got my bracket and spring a few days ago. I'm still looking for the spring that is used on the kickdown though. How about one of those, do ya have???

[Moparal]

I got a complete bracket and kick down assembly off a 70 rt 383 challenger. It should be on there.

[kmyles]

Let me know if it is there. I may hit you up for the kickdown linkage(if it's something you can part with) as mine may be a bit to short. I will try it tonight and let you know.
Thanks!

[kmyles]

Ok so I just tried to get the kickdown linkage hooked up with no luck. Once it's hooked up on the carb side it won't reach on the tranny side?? I measured the kick down rod and it measures around 28 inches without any of the linkage hanging of the end. I'll post some pics tomorrow to show you what I mean.
 
So Al is that linkage with the spring up for grabs?? If so can you measure it and let me know. I'm wondering if I have a linkage for a sb since the idiot that had the car before me had a sb throttle braket held in with one bolt because that's all that would line up...duh! The right bracket is on there now but the linkage dosn't seem to mate up??
Kevin

[Moparal]

I'll get it dug out. I am positive this what I have works on a 383 727 all stock intake and carb. I took it off myself.

[kmyles]

Excellent, I'll post some pics of what it looks like so we can make sure.
Thanks

[kmyles]

Here is what I am dealing with. Did you get a chance to dig yours out?



Connected on the top but not on the bottom

Look toward the top and you can see the linkage is way upand dosn't reach



Mine rubs on the corner of the valve cover and is very stiff to move even when it's only hooked up on the top side, I can only image how tuff it would be if I could get it to reach the bottom!!

[Moparal]

No, I was in town mailing off a suprise to a member.  What I have for a 70 is completely different.  You will like What I have. It is a 3 piece fully adjustable set up. 

[kmyles]

No, I was in town mailing off a suprise to a member.  What I have for a 70 is completely different.  You will like What I have. It is a 3 piece fully adjustable set up. 

PM how much and I'll paypal you. You should already have my address but let me know if you misplaced it. Can you post a pic of it when you get a chance?
 

[Moparal]

Im downloading you a pic now along with other members requests. Give me a few minutes.  It will need cleaning.  This that I have is sought after by many.  If you turn it down, it is not forsale to other members as of now. I only have 2 sets left.  I didnt clean it either.

[Moparal]

Here ya go.  I have to take the lever off the tranny yet. A neighbor came by to chat while I was pilaging around. The lever is specific to the set.  All clips are included as with the trans swivel.  This is fully adjustable

[kmyles]

That looks totally different than mine! PM sent