Author Topic: 4.75' bolt pattern rally wheels?  (Read 6111 times)

Offline Rob_In_MN

  • Noob for life
  • Jr. Member
  • **
  • Posts: 80
4.75' bolt pattern rally wheels?
« on: December 01, 2009 - 12:18:14 PM »
Ok I have a stupid/newb quesiton. 

I bought a parts/project 1970 cuda that had aftermarket wheels on it.  However, they  guy gave me two rally wheels he had laying next to the car that I presumed where from the cuda.  However, they have a 4 and 3 quarter bolt pattern which doesn't fit the lugs on the cuda. 

I'm just curious where they used 4.5' vs. 4.75' wheels on e-bods.

thanks!
Rob aka Noob for life  :bigsmile:




Offline burdar

  • Sr. Resident
  • ******
  • Posts: 5925
Re: 4.75' bolt pattern rally wheels?
« Reply #1 on: December 01, 2009 - 01:39:41 PM »
Smaller bolt pattern wheels were used on A-bodies up until the mid 70's.  I'm not sure what year exactly they changed to the big bolt pattern.  I think the smaller pattern Rallye wheels are worth some good money though.

Offline 73Chally

  • Resident
  • *****
  • Posts: 2381
Re: 4.75' bolt pattern rally wheels?
« Reply #2 on: December 01, 2009 - 03:14:40 PM »
5x4.5 bolt pattern is standard Mopar/Ford for that period.  5x4.75 would be a Chevy bolt pattern.

Offline 72hemi

  • Resident
  • *****
  • Posts: 4812
  • MEMBER SINCE JANUARY 2006
Re: 4.75' bolt pattern rally wheels?
« Reply #3 on: December 01, 2009 - 03:30:03 PM »
Smaller bolt pattern wheels were used on A-bodies up until the mid 70's.  I'm not sure what year exactly they changed to the big bolt pattern.  I think the smaller pattern Rallye wheels are worth some good money though.

Smaller bolt pattern is 4 inch, 4 3/4 is the GM pattern. In 1973 Chrysler switched the A-bodies over to the larger 4 1/2 inch pattern.

1972 Dodge Challenger 340 6 Pack 4-speed
1996 Dodge Viper GTS Coupe

Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: 4.75' bolt pattern rally wheels?
« Reply #4 on: December 02, 2009 - 01:03:36 PM »
the trucks went to a 5" bolt circle in 80 , I do not remember them ever using the 4.75 "

Challenger - You`ll wish You Hadn`t

Offline acudanut

  • Full Member
  • ***
  • Posts: 928
Re: 4.75' bolt pattern rally wheels?
« Reply #5 on: December 02, 2009 - 01:07:32 PM »
 All is very true. Those are Chevy rims.

Offline Rob_In_MN

  • Noob for life
  • Jr. Member
  • **
  • Posts: 80
Re: 4.75' bolt pattern rally wheels?
« Reply #6 on: December 02, 2009 - 03:36:16 PM »
Well, I'm no genius ,but I could swear they were dead ringers for Mopar rally wheels.  Sadly, they're out at my sister's farm now.  I'll have to grab one and take a pic some time.  maybe I'll ressurect my post then.  cuz I'm pesky like that  :naughty:

Offline Super Blue 72

  • Permanent Resident
  • *******
  • Posts: 12711
  • "Big 'n Little" Member since 8/9/05
    • Phil's Super Blue '72
Re: 4.75' bolt pattern rally wheels?
« Reply #7 on: December 03, 2009 - 05:06:51 PM »
Assuming they are Mopar rally rims, have you tried them on your Cuda? 

Maybe it's the way you are measuring the bolt pattern, should be middle of one stud to across the the furthest outer edge of the opposite stud for a 5 bolt pattern.  :2cents:
1972 Dodge Challenger Rallye 340, AT, Code TB3=Super Blue, SBD=8/17/1971.  Yes, a Rallye without the fender louvers from the factory because of the body side molding option.

Pic #2 and 3 of my ARII 1/24 scale model car 

Phil in New England-Massachusetts  Always thank God for what you have!

http://www.cardomain.com/ride/456046/1972-dodge-challenger

Offline Rob_In_MN

  • Noob for life
  • Jr. Member
  • **
  • Posts: 80
Re: 4.75' bolt pattern rally wheels?
« Reply #8 on: December 04, 2009 - 04:40:34 PM »
I'm measuring them correctly - I double checked on the internet to be sure :)

I have sort of tried them on the car... I pulled the wheels off my 62 t-bird and put them on the cuda for moving it around since the rally wheels didn't have tires on them.  The t-bird wheels fit, with 4.5' bolt pattern.  Transitive property and all that :-) :lol2:

Offline Super Blue 72

  • Permanent Resident
  • *******
  • Posts: 12711
  • "Big 'n Little" Member since 8/9/05
    • Phil's Super Blue '72
Re: 4.75' bolt pattern rally wheels?
« Reply #9 on: December 04, 2009 - 07:44:03 PM »
Transitive property and all that :-) :lol2:

Math major or engineer?  :clueless:  Love that transitive property!  :grinyes:
1972 Dodge Challenger Rallye 340, AT, Code TB3=Super Blue, SBD=8/17/1971.  Yes, a Rallye without the fender louvers from the factory because of the body side molding option.

Pic #2 and 3 of my ARII 1/24 scale model car 

Phil in New England-Massachusetts  Always thank God for what you have!

http://www.cardomain.com/ride/456046/1972-dodge-challenger