driprail moulding gasket

[dutch]

anyone know if the foamy stuff is still available?

[72rtchallenger]

yes on ebay an probably year one.. I think this is what you want.may not be exactly like the old but does work,,there may be better out there but it is just foam
http://cgi.ebay.com/ebaymotors/DMT-Mopar-E-Body-70-71-Drip-Rail-Seals-Cuda-Challenger_W0QQitemZ360184728585QQcmdZViewItemQQptZMotors_Car_Truck_Parts_Accessories?hash=item53dcaecc09

[Topcat]

They make all the foamy gaskets. In fact you can buy a whole kit from them after a car is painted.

http://www.detroitmuscletechnologies.com/pdfs/DMT%20CATALOG%2070-74%20E%20BODY.pdf

[dutch]

thanks,

I bought a exterior gasketset for $5 off e-bay a few years ago, but I havent seen the envelope ever since I got it...  same kit $78   

[RB2929]

Need a little assistance figuring this out.  The kit has:  (2) rolls of 1/8"x7/8" black poly foam to seal between the weatherstrip channel and the roof.

I went out to the car and looked.  All I have isthe wide piece of rubber that runs along the interior where the window rolls up into.

Q: Where does the black poly foam go?

Thanks
Ron

[Topcat]

The galvanized trim goes on first. It goes on behind it.
Then the chrome trim drip rails screw onto that.
Then the weather strip goes on. IIRC.

[72rtchallenger]

The galvanized trim goes on first. It goes on behind it.
Then the chrome trim drip rails screw onto that.
Then the weather strip goes on. IIRC.

yes the trim separates in 2 layers when removed