I have a 1970 Challenger project and am not new to forums, but new to this forum.
This was a beat up car when i got it, but had potential, so i went with it. The car was a 318 automatic, came to me with a 440. I have back-halved it with a 4-link and narrowed dana, stock rebuilt front suspension, 4-spd, full NHRA 12 point cage, tied frame rails, reinforced front framerails with 1/8" plate steel. I have fiberglass doors, trunk lid rear valance and rear bumper. I have the front fenders, hood, bumper, headlight bucket panel, and valance all fiberglass, and i have been glassing it all together with the nose set up to tilt on a 1 inch square metal frame. I have questions about how the grill/headlight bezels/bumper should fit. I have no radiator support or inner fenders so the grill needs to hang off the fenders/hood as reference.
right now i need to get the grill correctly in place and then i can glass in the headlight panel. I have the headlight buckets and headlights installed in the bucket panel with all the adjuster hardware and they will be positioned and then glassed in place. Any thoughts/ideas would be helpful.
