lemon twist 70 Cuda Shaker 472 Hemi 2x4 - keisler 5 speed - Dana

[wagesofsin]

 

[farmboy70]

Could you post up a picture of the throttle cable mount side of the carbs. I would like to see it to make some changes to mine.
Thanks
Dave

[farmboy70]

Sorry that should have been close-up picture.
Dave

[mopardave]

i would have guess that, no problem, just so you know, we are running the stage 5 marine intake which spreads the carb a bit more than the oe afb intake, Have twin 650 AVS thunder series carbs. I will snap a couple pics for ya. main reason for this route for intake and carbs is the shaker base plate fitment.

[DoNotChallengeHer]

Looking fantastic, Dave 

[bb71challenger]

Wow, very fast progress Dave. Its looking saweet!

[mopardave]

DAVE, Here is the linkage pic. we just got the car back from the trim shop.

[farmboy70]

Thank you, that will help me a lot with my linkage.
Dave

[mopardave]

sure, no problem, glad i could help. just fyi this linkage was put together from A and A trans

[farmboy70]

It would appear I see my problem, my intake does not have a provision for the center spring mount. I have it temporarily on with one bolt.
At wide open does your spring hit the linkage on the front carb?
Thanks
Dave

[mopardave]

i dont believe so. I will have to check monday and see, I do know we moved the throttle cable back so the cable has adequate throw now. I'll post a pic of that monday as well.

[The Cuda Guy]

 

[Mentally Challenged]

DAVE, Here is the linkage pic. we just got the car back from the trim shop.

   That is a thing of beauty

[mopardave]

Dave, here are the other pics I mentioned, We had to modify the cable mounting bracket, by moving it back. also we had to shorten the red spring to keep the front carb closed, We got this fired up today and it is mean as hell.

[mopardave]

John, here is the booster I got from you, thanks again, Looks great in with the hemi.

thanks all for the great comments. Still working on putting the interior together and the door glass.