Need steel wheels w/deep backspace

[OUTLAW]

Maybe someone here can help me. I am looking for a pair of plain steel wheels that are 15 x 12" with 5x4.5 bc and a backspace of 7.5" or 8". I checked all the normal places with no luck. Then I found a guy on ebay who was selling a set of Bart wheels ( for IMSA stock cars) and I went to Bart wheels and they don't offer anything deeper than 6". I tried Aero wheels (for stock cars too) and same story. Summit and Jegs have mags but can't come up with steels either. Trying to avoid the expense of custom made wheels. Any ideas?

[wagesofsin]

i have some welds lying around, ill measure em up in the morning.   

[the_engineers]

Check Stockton Wheel.  They show a Mopar plain steelie (they call it a 40 series) in 15x14 with 8" bs on the site.  Looks like their 15 x 12 is $195.
http://www.stocktonwheel.com/pdf/PAGE4.pdf

[HP2]

Make your own for about $75 each.

http://www.speedwaymotors.com/Wheel-Shells,218.html

[OUTLAW]

I will check it out thanks all

[the_engineers]

How hard would those be to weld up?

[OUTLAW]

to get them dead true for me - real hard but there is a couple shops in town that true bent wheels that have the jigs to do it for about $25 each ... they just won't build any