Chall R/T Emblem position

[Chryco Psycho]

I need the measurements for the Chall & R/T emblems on the deck lid for 1970 Please 

[Mike70]

If I can get to mine this weekend I'll take a photo. I know mine have never been off.

Mike

[Chryco Psycho]

put a measuring tape in the pix too
 Thanks Mike

[farmboy70]

Barry has the engineering drawings on his site.
Dave

[Alaskan_TA]

Had.

& that was years ago, I do miss them;

http://www.hamtramck-historical.com/photos-engineeringDrawingsMenu.shtml

[farmboy70]

OPPS

[Devil]

 

[Chryco Psycho]

we are going to have to delete the pic or remove the Hamtramck historical from that image 

[RusTy/SE]

Neil here's a couple of shots of the decklid, although not the original one, which was on my car when it arrived back in early '94 with tape measure added. The glue residue suggests an R/T emblem was on at one time but no sign of residue from the Challenger emblem. When the time comes for my car i'll add the Challenger emblem, lining up the bottom of 'Challenger' with the bottom of the R in 'R/T'

The top of the 'R' is 3 inches from the bottom of the decklid.


The bottom driver side corner of the 'R' is 6 1/4 inches from the right side of the decklid.

[Mike70]

Chryco,  Sorry I haven't gotten this yet. I will get it this evening when I get home. My memory is not what it used to be.

Mike

[Chryco Psycho]

No issue Mike
 Devil cam eup with the Chrysler engineering drawing pic 

[Mike70]

Did it anyway, just cause I said I would. No RT emblem on the decklid though. See how this compares with the drawings.

Mike

[Chryco Psycho]

Thank Mike , I will check it with the drawing when I get back to the car