e-body mono leafs/caltrac system for sale or trade..w/pics///SOLD///THX C/C

[TROUBLE987]

Its all new i have the mono drop springs/adjustable shocks/caltracs everthing you could buy from calvert to make a e-body hook..I jumped the gun a little to quick when i bought it cause i want to make my car a touring car and this system is for street/drag racing...i would like to trade for a set of drop springs and what ever i need to get my car back on the ground..also has the offset brackets to move the springs in and i have a b-body rearend under the car..here is the pics...lets talk

[challengerx]

I have nothing to trade you, are you willing to sell and if so how much.

[TROUBLE987]

I have nothing to trade you, are you willing to sell and if so how much.

What all are you wanting?I tell ya what let me see what a set of leaf springs cost with the doctor diff offset kit and shocks..i know it want cost what the system cost but hey thats life..are you interested in the rearend too do you have a stock lenth rear ?

[fiddlestix]

PM sent

[The Cuda Guy]

I got stock springs on my cuda I would trade you for.  Then lowing your car from that point?  Let me know what your needing or looking for.

Don 

[TROUBLE987]

I got stock springs on my cuda I would trade you for.  Then lowing your car from that point?  Let me know what your needing or looking for.

Don

OK cuda Guy I will

[challengerx]

I would be looking for the springs, shocks and cal tracs, I have a srock e body rear. If you are looking for ss springs,I do have those if you are interested in trading. I have the springs, shackles, extended hangers and shocks.

[The Cuda Guy]

Just so we are all tracking in this thread, Im willing to trade you all of my stock set up for your current cal trac setup.  PM me with what exactly you are wanting to do and we will make it happen.

Don

[TROUBLE987]

Im tracking down a e-body rearend then ill be able to let the stuff go,after i posted we started building house and i got to be able to move the car..i think i found one going to look this weekend..well let you guys know..once i have it i can work out a deal with one of yall..so ill keep yall posted thx guys sorry for the delay

[fiddlestix]

I'm still interested   Let me know. Thanks

[mopar12372]

ill buy the shocks if youll sel them , that set up is good i have it on my car.

[TROUBLE987]

your shocks are mounted wrong....... 

They are just stuck up there,not bolted..the car dont have brakes or nothing..thx though

[mopar12372]

do you wish to sell the shocks?

[TROUBLE987]

na!! im going to try and sell the whole thing if i cant then ill just keep the stuff,sooner or later some one will want them..or trade whatever comes first..

[TROUBLE987]

just some friendly advice for you or anyone who buys them you can see clearly when mounting up the caltracs it makes your pinion go nose down pretty good (yours is pretty far nosed down) as you can see in your pic! I had the same problem in my challenger and had to cut the perches off and re weld......  but what the heck do i know........ 

Yea i had a set on a duster,all we done was get the car at race weight put whatever you way in the drivers seat,then set the pinion to say 4 degrees buy shims and set the little pressure on the spring like a little more than say 3/8 of a turn and let it hunt..should put it on the bump!!!