help!!!found some damage!!!

[TROUBLE987]

need some measurements,or do anyone know where i can get the measurements at to check the front frame rail...i would like to maybe get some between the frame rails at the very front of the cuda,if anyone can throw a tape on it..thx here is some pics..

[mopar12372]

they are in the mopar chassis book, factory book , resto book ect barns and nobile ha sthe books on the shelf . if anyone doesnt have them ill get them for you if needed ,

[TROUBLE987]

i got a mopar chassis book let me go grab it and see if i can find it thx..

[TROUBLE987]

well maybe i dont,i have the mopar engine book,so ill check those other ones out too..thx for the info though

[IMNCARN82]

this is all I got.

[TROUBLE987]

this is all I got.

thx man i think i might be able to use this..

[TROUBLE987]

does anyone have the measurements for the front outside to outside frame rail...the very front..?

[cwestra]

I measure between 36-1/4" and 36-3/8" on my '70 Cuda.  That would be the distance between the frame surfaces that the bumper brackets mount to.

[IMNCARN82]

Find a good frame shop... I'm about to get mine straightened out too. Then get some frame connectors welded in.     It can be fixed. Or at least straightened.

[TROUBLE987]

I measure between 36-1/4" and 36-3/8" on my '70 Cuda.  That would be the distance between the frame surfaces that the bumper brackets mount to.

good deal im a hair past 36-1/4 myself top and bottom..now i need to find out if im out up and down..it looks like its just the support that got hit..but i want to make sure,cause once i weld in my xv lower support its done then...thx for the help guys..

[TROUBLE987]

Find a good frame shop... I'm about to get mine straightened out too. Then get some frame connectors welded in.     It can be fixed. Or at least straightened.

thats the problem around here i wouldnt trust them for nothing..i got all xv stuff stiffening stuff so i got that covered..oh i really dont think it got the frame rail..i see no kinks,buckles,and side to side im good..but i may have to do something to check the north and south of the frame rail..

[mopar12372]

this is all I got.

thats the one