Maybe valve clapping at 12-1500 Rpm

News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: Maybe valve clapping at 12-1500 Rpm  (Read 1014 times)

    Offline Danishmopar

    • Jr. Member
    • **
    • Posts: 337
    • 70´ Challenger. Denmark, scandinavien.
      • Overhauling 70´Challenger
    Maybe valve clapping at 12-1500 Rpm
    « on: July 04, 2010 - 02:47:13 AM »

    Hi Guys  :wave:

    I have a clapping noise at 12-1500 rpm on my ´70 318. It souns like valvetrain noise.

    I have new lifteres and exhaust gaskets. checket all the bolts in the valvetrain.

    My engine timing says, at idle 15 degrees and 34 degrees at 3000 rpm with out vacuum, fine i think. But with vacuum it advance up to 55 degrees could that high advance be the reason for the clapping?

    Thanks Guys

    Logged
    Work and Supportet your forces at 821st Air Base Group. Thule AB, Greenland
    Pictures of My challenger: http://picasaweb.google.dk/dennisogkatja/Overhauling70Challenger#


    Offline UKcuda

    • Full Member
    • ***
    • Posts: 546
    • Tell them I'm on my way
    Re: Maybe valve clapping at 12-1500 Rpm
    « Reply #1 on: July 04, 2010 - 03:16:51 AM »
    Quote from: Danishmopar on July 04, 2010 - 02:47:13 AM
    .............could that high advance be the reason for the clapping?


    Don't think so but there's an easy way to find out.
    Logged
    '72 'cuda

    Offline Danishmopar

    • Jr. Member
    • **
    • Posts: 337
    • 70´ Challenger. Denmark, scandinavien.
      • Overhauling 70´Challenger
    Re: Maybe valve clapping at 12-1500 Rpm
    « Reply #2 on: July 04, 2010 - 03:52:01 AM »

    Hi.

    Its still there when i unhock the vacuum. But after I have realy have fine adjustet the timing it sems to be better.

     :cheers:
    Logged
    Work and Supportet your forces at 821st Air Base Group. Thule AB, Greenland
    Pictures of My challenger: http://picasaweb.google.dk/dennisogkatja/Overhauling70Challenger#

    Offline Aracer

    • Jr. Member
    • **
    • Posts: 452
    Re: Maybe valve clapping at 12-1500 Rpm
    « Reply #3 on: July 07, 2010 - 12:35:40 PM »
    Tighten the spring inside the vac. pot, counter clockwise to make it less sensitive with an Allen wrench.
    Logged

    Offline Danishmopar

    • Jr. Member
    • **
    • Posts: 337
    • 70´ Challenger. Denmark, scandinavien.
      • Overhauling 70´Challenger
    Re: Maybe valve clapping at 12-1500 Rpm
    « Reply #4 on: July 08, 2010 - 04:25:01 PM »


    Hi Guys.

    Thanks for the advice. She running super now.

     :cheers:
    Logged
    Work and Supportet your forces at 821st Air Base Group. Thule AB, Greenland
    Pictures of My challenger: http://picasaweb.google.dk/dennisogkatja/Overhauling70Challenger#
    Pages: [1]
    « previous next »