Author Topic: shaker set up (Read 4389 times)

hpe600rt · « **on:** July 24, 2010 - 10:50:25 AM »

does anyone have any info on the hp gain from a shaker set up on a rt, and do you know if the mopar strut brace will fit with a shaker,i can get the whole set up for 2k and want to see if its worth it or if i would get just as much hp form a cold air intake

thedodgeboys · « **Reply #1 on:** July 24, 2010 - 11:35:42 AM »

my

you would get more from a good CAI I am not aware of any HP gain from a shaker unless somehow it was made functional.

check out petty garage I think they are doing shakers and they have the braces call them and ask. or shop hemi.com
http://www.shophemi.com/

73Chally · « **Reply #2 on:** July 24, 2010 - 11:53:05 AM »

The shaker is functional, but I doubt it really gives you any HP gain. It still routes the air back down and through the box, which pretty much remains in the stock location. A CAI will give you just as much for pennies on the dollar, but of course a shaker looks really cool

hpe600rt · « **Reply #3 on:** July 24, 2010 - 12:36:30 PM »

i like the factrey hood myself and it is retro to the challenger,the shaker does look cool but if no hp gain its a rip off for 2k when you can get a cai from mopar for about 300 or so,i see you can buy just the shaker for about 800 or so but it looks funny without the right hood and that is wher the 2k comes in and you still would have to paint it.i would go with the shaker if there is a hp gain over the cai,i havent found any info on it

73Chally · « **Reply #4 on:** July 24, 2010 - 09:13:06 PM »

Just read a tech article in Mopar Muscle about a 40+ HP gain in the 6.1 with a new throttle body and CAI. I'm sure it would be somewhere close to that with the 5.7, too. It's probably 10-15 with just the CAI, and likewise for just the new throttle body.

hpe600rt · « **Reply #5 on:** July 25, 2010 - 07:40:58 AM »

do you know what throtel body was used

thedodgeboys · « **Reply #6 on:** July 25, 2010 - 09:23:10 AM »

Quote from: 2010rt on July 25, 2010 - 07:40:58 AM

do you know what throtel body was used

80 mm

73Chally · « **Reply #7 on:** July 25, 2010 - 12:54:35 PM »

Quote from: 2010rt on July 25, 2010 - 07:40:58 AM

do you know what throtel body was used

http://www.bbkperformance.com/products/throttle-bodies/dodge-throttle-bodies/05-10-dodge-hemi-57l-85mm-power-plus-throttle-body.html

The article used the 85mm, but not sure what the 90mm would get you.

hpe600rt · « **Reply #8 on:** July 25, 2010 - 01:24:07 PM »

the biger the better right that should work with the perdator 93 tune i have or would i have to download a new one for the car .dont get me wrong i love the shaker but if you dont get any good hp gain for 2k,i dont know why you would buy it

MEK-Dangerfield · « **Reply #9 on:** July 25, 2010 - 01:58:47 PM »

Quote from: 2010rt on July 25, 2010 - 01:24:07 PM

.dont get me wrong i love the shaker but if you dont get any good hp gain for 2k,i dont know why you would buy it

People buy it just for the cool factor.

For me, NO way.

hemi71 · « **Reply #10 on:** July 25, 2010 - 09:52:11 PM »

I just picked up a Cervini shaker setup at Carlisle for $1300. I will need to paint the hood and shaker bubble, figure add $500 for that. So I'm in $1800, and to be honest I dont care if it made 5-10 HP less, I'm adding it since I think shakers are the coolest looking hoods ever offered on a Mopar.

Devil · « **Reply #11 on:** July 25, 2010 - 10:47:24 PM »

The shaker will give you almost no HP gain. The boundary layer of air flows right over it, providing no benefits.

The Cervini Shaker Hood looks good on Mustangs, not Challengers. The size is way off.

Here's the best one I've found so far,

http://www.challengertalk.com/forums/f134/afr-shaker-only-true-shaker-pictures-video-40365/

I'll get one eventually for looks, but not for any performance gains.

Ryan

hpe600rt · « **Reply #12 on:** July 26, 2010 - 09:19:43 AM »

the afr was the one i was looking at to i like it but 2k pluss paint seems like alot of cash for something that doesnt do any thing

Devil · « **Reply #13 on:** July 26, 2010 - 11:31:47 PM »

Neither of them do anything, it is all about looks, which one looks better. You can call them up and work out a deal.

Author Topic: shaker set up (Read 4389 times)

hpe600rt

shaker set up

thedodgeboys

Re: shaker set up

73Chally

Re: shaker set up

hpe600rt

Re: shaker set up

73Chally

Re: shaker set up

hpe600rt

Re: shaker set up

thedodgeboys

Re: shaker set up

73Chally

Re: shaker set up

hpe600rt

Re: shaker set up

MEK-Dangerfield

Re: shaker set up

hemi71

Re: shaker set up

Devil

Re: shaker set up

hpe600rt

Re: shaker set up

Devil

Re: shaker set up