71 Challenger Convertible Resto Help

News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: 71 Challenger Convertible Resto Help  (Read 3559 times)

    Offline daveh

    • Full Member
    • ***
    • Posts: 813
    71 Challenger Convertible Resto Help
    « on: August 09, 2010 - 10:39:23 AM »
    Hi Guys,

    I am getting ready to remove the K-member and want to construct something with wheels to put under the front so I can move it around.  I' guessing I would attach it to the bumper bolt holes somehow.  I only need it for the front the real axle is still in and I have regular dollies under them.

    What I am looking for is pictures of creative ideas that I can use.  I appreciate it very much.

    Dave
    Logged


    Offline sprecks

    • Full Member
    • ***
    • Posts: 915
    Re: 71 Challenger Convertible Resto Help
    « Reply #1 on: August 09, 2010 - 01:04:59 PM »
    Are the doors on the car? The reason I ask is if not, be sure to put a brace from the hinge to the door striker. This will keep the body flex down to a minimum. Attaching the dollie wheels where the bumper brackets attach will work fine. This is where I attached the rotisserie when I did my car. But don't do it with the doors removed without the brace. If the doors are on the car, don't open them.  :2cents:
    Logged
    you can call me Jay
    I've seen sicker dogs get well.

    1971 Challenger Vert - 472 Hemi EFI
    1969 Road Runner 440/Auto
    2017 Ram Laramie 1500 - Hemi

    Offline Topcat

    • C-C.com Expert
    • ********
    • Posts: 15376
    • Member since 9/16/04
    Re: 71 Challenger Convertible Resto Help
    « Reply #2 on: August 09, 2010 - 01:38:31 PM »
    Quote from: sprecks on August 09, 2010 - 01:04:59 PM
    Are the doors on the car? The reason I ask is if not, be sure to put a brace from the hinge to the door striker. This will keep the body flex down to a minimum. Attaching the dollie wheels where the bumper brackets attach will work fine. This is where I attached the rotisserie when I did my car. But don't do it with the doors removed without the brace. If the doors are on the car, don't open them.  :2cents:


    Certainly good safety measure but I don't really feel it's necessary for a hard top car in good condition. The roof ties everything together for structural support. A vert and really rusty cars is a must do having door support.

    I moved my car 180 miles on a trailer just like in the picture. The only thing added was angle iron put on to box the legs together.
    Logged
    Mike, Fremont, CA.

    Offline daveh

    • Full Member
    • ***
    • Posts: 813
    Re: 71 Challenger Convertible Resto Help
    « Reply #3 on: August 09, 2010 - 02:18:42 PM »
    Yes, the doors are on the car but will be removed eventually to repair the rust around the hinges.  But I do plan on  replacing the doors with bracing.  I have already welded in sub frame connectors already so that should help. 

    BTW - The Challenger is a convertible

    Hey does anyone have any old crappy hinges that I can use to weld up some bracing?

     Thanks
    Logged

    Offline Belgium Cuda

    • Full Member
    • ***
    • Posts: 794
    • Living in Belgium but beeing Swedish
    Re: 71 Challenger Convertible Resto Help
    « Reply #4 on: August 09, 2010 - 02:59:54 PM »
    This is how I solved it, have more pics if you need.

    Per
    Logged
    1970 Challenger Convertible - to become a Hemi tribute
    1968 Charger R/T 500 cui stroker

    Offline Topcat

    • C-C.com Expert
    • ********
    • Posts: 15376
    • Member since 9/16/04
    Re: 71 Challenger Convertible Resto Help
    « Reply #5 on: August 09, 2010 - 03:20:35 PM »
    Here are what the door re inforcements look like. I'm sure with enough creativity you could make your own.

    http://www.autotwirler.us/catalog/popup_image.php?pID=46\')
    Logged
    Mike, Fremont, CA.

    Offline dutch

    • Sr. Resident
    • ******
    • Posts: 6944
    Re: 71 Challenger Convertible Resto Help
    « Reply #6 on: August 09, 2010 - 06:30:49 PM »
    I made a small frame that bolts in place of the k-member.  I wanted the dollywheels as close as possible to the position of the wheels. It does help when adjusting panels.

    Logged
    *** Bart ***

    Offline thedodgeboys

    • Resident
    • *****
    • Posts: 3633
    • ''Normal’s Overrated''
      • THE DODGE BOYS
    Re: 71 Challenger Convertible Resto Help
    « Reply #7 on: August 09, 2010 - 06:51:11 PM »
    Sorry I dont have a picture of just the wheel setup but you may get the idea.
    if your close to Kansas City you can barrow my setup  :bigsmile:





    Logged
    Go Fast & Have Fun...
    70 6.1 HEMI 6-speed Drop Top...

    Offline daveh

    • Full Member
    • ***
    • Posts: 813
    Re: 71 Challenger Convertible Resto Help
    « Reply #8 on: August 10, 2010 - 01:11:18 PM »
    Awesome thanks Guys
    Logged
    Pages: [1]
    « previous next »