Author Topic: fuel setup needed  (Read 928 times)

Offline lime73

  • Jr. Member
  • **
  • Posts: 204
fuel setup needed
« on: September 01, 2010 - 11:31:53 AM »
Need some help here.   I took the Holley ProJection system off my 440 (JUNK!!!) and am going backl to carb.   I need the whole shooting match, carb pump and also need a fuel pump push rod.   Any suggestions?   How does everyone feel about the street avanger carbs?   Want a mechanical pump also.   Any input is appreciated.  Thanks




Offline FJ5_440

  • Full Member
  • ***
  • Posts: 879
  • Wisconsin
Re: fuel setup needed
« Reply #1 on: September 01, 2010 - 11:38:17 AM »
IMHO:
Carter street mechanical pump
Mopar Performance FP pushrod
Fine lines fuel line
Holley Street Dominator intake
Holley(type) - 850 or greater Carb
** Shane **

Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: fuel setup needed
« Reply #2 on: September 01, 2010 - 11:39:15 AM »
I have been using the Proform carbs , they are the best I have found at this point
 Fuel pump rods are available through Mopar but are out of stock often
Carter HV pumps seem to work ok

Challenger - You`ll wish You Hadn`t

Offline lime73

  • Jr. Member
  • **
  • Posts: 204
Re: fuel setup needed
« Reply #3 on: September 01, 2010 - 02:52:53 PM »
any particular model# proform carb?

Offline mopar12372

  • Sr. Member
  • ****
  • Posts: 1163
    • mopartech
Re: fuel setup needed
« Reply #4 on: September 01, 2010 - 03:50:29 PM »
whay not just block off the mechanical port / run a holley red with a eddelbrock 750 , reliable set up good on the street . want any big hp #s you need bigger everything that i stated .
MOPARTECH.NET ( come over and visit some time )
RESTO PICTURES
http://www.cuda-challenger.com/cc/index.php?topic=71096.30

Offline MEK-Dangerfield

  • C-C.com Expert
  • ********
  • Posts: 20946
  • I don't get NO respect! Member since 1/25/2002
Re: fuel setup needed
« Reply #5 on: September 01, 2010 - 04:20:29 PM »
any particular model# proform carb?


This is what I'm having fun with. My engine is only mildly upgraded, so if you have something crazy, you can go bigger. It has an electric choke, but you can get the race series without a choke if you want. I live where it gets cold, so I like having the choke.

   http://www.summitracing.com/parts/PRO-67214/
« Last Edit: September 01, 2010 - 04:22:04 PM by MEK-Dangerfield »

Mike

1970 Challenger - SOLD
2016 SXT+.  1 of 524 SXT+'s in Plumb-crazy for 2016.

Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: fuel setup needed
« Reply #6 on: September 02, 2010 - 11:36:08 AM »
The Holley electric pumps simply suck , way to loud
 I have been using 850 race series Proform carbs on most 440s , the street series works well too 

Challenger - You`ll wish You Hadn`t

Offline mopar12372

  • Sr. Member
  • ****
  • Posts: 1163
    • mopartech
Re: fuel setup needed
« Reply #7 on: September 02, 2010 - 12:13:36 PM »
they are loud but consistant. i had a blue pump that lasted 10 years. i have a mallory and im  happy with it.
MOPARTECH.NET ( come over and visit some time )
RESTO PICTURES
http://www.cuda-challenger.com/cc/index.php?topic=71096.30

Offline moper

  • Resident
  • *****
  • Posts: 2368
Re: fuel setup needed
« Reply #8 on: September 03, 2010 - 12:01:11 PM »
What is the engine/car setup with now? (intake, cam, etc...)