Author Topic: My 71 Cuda project  (Read 13814 times)

wagesofsin

  • Guest
Re: My 71 Cuda project
« Reply #15 on: September 27, 2010 - 11:42:43 AM »
ok , ill be an a ss here. to respond to mr. zimmermans challenge. i have a total of 6500.00 in my daily driver challenger and a total of 9500.00 in my 'cuda. both include purchase prices of 2k and 3.5k . i am not trying to come off as arrogant nor do i want to be misconstrued. i realise both cars would have cost a small fortune to get where they are now if it wasnt for me doing all the work. i just see all to frequently folks stating what you cannot do for less than x amount of money. ok , ill go now.




Offline DMZ73

  • Sr. Member
  • ****
  • Posts: 1482
    • http://www.pbase.com/dmz73/
Re: My 71 Cuda project
« Reply #16 on: September 27, 2010 - 12:21:44 PM »
 :2thumbs: :smilielol:

I should have expected that, especially from you John.  :lol2:
My point was, I tried, and I came close, but I couldn't do it for under 10K..
I owe the wife a synopsis of the cost of restoration this year, so I will truly find out how much money I have into it.
My point was, Not everyone is capable of the budgetary miracles, :grinyes: :lol2: and the ability to monetarily come out on top of a resto.
I would be hard pressed to figure out how to do that on a 71 Cuda.
I'm not saying it's not possible, I say it's nearly impossible.
Expperience is probably the key to making it happen. I just don't have enough experience yet.
Dan
One E body saved, 7 years and counting.

Offline moparclown

  • Resident
  • *****
  • Posts: 4335
Re: My 71 Cuda project
« Reply #17 on: October 28, 2010 - 03:21:14 PM »
I agree and have come to the decision to sell my 71 Cuda.I will be listing it in the next day or so on craigslist as I would like any potential buyers to actually come and look it over in person.If there are no takers I will be stripping it and selling it off piece by piece,I WANT IT OUTTA HERE!I have found something else that I want and have some other things to take care of.
Thanks Doug

Offline 71cudajoe

  • Jr. Member
  • **
  • Posts: 374
    • 71 Cuda Restoration Project
Re: My 71 Cuda project
« Reply #18 on: October 28, 2010 - 04:33:56 PM »
I agree and have come to the decision to sell my 71 Cuda.I will be listing it in the next day or so on craigslist as I would like any potential buyers to actually come and look it over in person.If there are no takers I will be stripping it and selling it off piece by piece,I WANT IT OUTTA HERE!I have found something else that I want and have some other things to take care of.
Thanks Doug


I noticed earlier today that there are two individuals on Moparts.com looking specifically for a 71 Cuda project car. I'm not sure if you've touched base with these people already or not. I'm also not sure what kind of deal they are looking for, but I thought I'd mention it just in case it could be a quicker/easier way for you to sell your car.

Go to this page on Moparts:
http://board.moparts.org/ubbthreads/showflat.php?Cat=0&Number=6226101&an=0&page=0#Post6226101

I believe both will need to be contacted via PM. If you are interested in contacting them and don't have a Moparts account, I'd be happy to make initial contact for you.

First buyer: DmanSRT71
"Looking for a 71 Cuda resto-mod project. Please be able to provide proof that it's not full of bondo'd over rust or incorrectly replaced panels..."

Second buyer: PatrickM
"1971 Cuda wanted, any condition is interesting if the price is right."


David - '71 HEMI Cuda Retro-mod
FOR PICS VISIT www.71cuda.net

Offline brads70

  • C-C.com Expert
  • ********
  • Posts: 18747
Re: My 71 Cuda project
« Reply #19 on: October 28, 2010 - 04:35:51 PM »
I agree and have come to the decision to sell my 71 Cuda.I will be listing it in the next day or so on craigslist as I would like any potential buyers to actually come and look it over in person.If there are no takers I will be stripping it and selling it off piece by piece,I WANT IT OUTTA HERE!I have found something else that I want and have some other things to take care of.
Thanks Doug

What are you gonna list if for ( price wise) $15k?
Brad
1970 Challenger 451stroker/4L60 auto OD
Barrie,Ontario,Canada
Proud to own one of the best cars ever made!!!!!

My restoration thread 
http://www.cuda-challenger.com/cc/index.php?topic=59072.0
 My handling upgrade post
http://www.cuda-challenger.com/cc/index.php?topic=73985.0

Offline 72hemi

  • Resident
  • *****
  • Posts: 4812
  • MEMBER SINCE JANUARY 2006
Re: My 71 Cuda project
« Reply #20 on: October 28, 2010 - 04:36:40 PM »
Wish I had the cash available, I would be all over that. Oh well. good luck with the sale and you next endeauver.
1972 Dodge Challenger 340 6 Pack 4-speed
1996 Dodge Viper GTS Coupe

Offline brads70

  • C-C.com Expert
  • ********
  • Posts: 18747
Re: My 71 Cuda project
« Reply #21 on: October 28, 2010 - 04:39:27 PM »
Wish I had the cash available, I would be all over that. Oh well. good luck with the sale and you next endeauver.
:iagree:  This is killing me! :pullinghair: :crying:
Brad
1970 Challenger 451stroker/4L60 auto OD
Barrie,Ontario,Canada
Proud to own one of the best cars ever made!!!!!

My restoration thread 
http://www.cuda-challenger.com/cc/index.php?topic=59072.0
 My handling upgrade post
http://www.cuda-challenger.com/cc/index.php?topic=73985.0

Offline moparclown

  • Resident
  • *****
  • Posts: 4335
Re: My 71 Cuda project
« Reply #22 on: October 28, 2010 - 05:17:38 PM »
The car is just mocked up for reason of checking to see what it still needed,it will have to come back apart and be restored.Its a big big project with about 95% of the parts needed to make it a car again.I am selling the car with the engine(70 340 intake to pan)trans(70 727) and all the parts that I purchased for it.I have over 20 grand into it and will take $10000 cash for the whole shooting match with one stipulaition,you have to come here in person and decide if you want this big project?
Thanks Doug
ps I will start stripping it next week and selling parts off of it if it isn't sold and paid for by the middle of next week.

Offline 71cudajoe

  • Jr. Member
  • **
  • Posts: 374
    • 71 Cuda Restoration Project
Re: My 71 Cuda project
« Reply #23 on: October 28, 2010 - 05:53:36 PM »
Just in case, here are a couple more individuals on FEBO.com looking for a 71 Cuda project car. Maybe one of these guys is a candidate to buy yours:

http://www.forebodiesonly.com/forum/showthread.php?t=2417

http://www.forebodiesonly.com/forum/showthread.php?t=751

David - '71 HEMI Cuda Retro-mod
FOR PICS VISIT www.71cuda.net

Offline JoltinJoe

  • Full Member
  • ***
  • Posts: 617
  • BALZ TO THE WALZ MAN
Re: My 71 Cuda project
« Reply #24 on: October 28, 2010 - 10:16:41 PM »
ps I will start stripping it next week and selling parts off of it if it isn't sold and paid for by the middle of next week.
Interested in the grille!  As always.  ;)
HIS: '68 GMC 3/4 ton pick-up truck, '73 Barracuda, '87 Firebird, '01 Jeep Cherokee and finally a '70 Barracuda Convertible!
HERS: 1980 Toyota Starlet, 1995 SAAB 9-5 and then '01 SAAB 9-3 and currently '08 Saab 9-3 convertible!
NEXT IS MINE: purple 2010 Dodge Challenger!!!

Offline moparclown

  • Resident
  • *****
  • Posts: 4335
Re: My 71 Cuda project
« Reply #25 on: October 30, 2010 - 08:46:31 AM »
The rolling shell is on craigslist,we'll see how this goes?

Offline JonS

  • Jr. Member
  • **
  • Posts: 318
Re: My 71 Cuda project
« Reply #26 on: November 04, 2010 - 06:35:22 PM »
One of the "interested candidates" linked above is me.  I'd be interested in knowing more; but MC's stipulation that the buyer be local or being willing to drive up and see it in person are a hanging point for those of us that are many hours away and are actually still employed.

I do have an empty garage, some free time, and a true love for the 71s though...

Jon

Offline brads70

  • C-C.com Expert
  • ********
  • Posts: 18747
Re: My 71 Cuda project
« Reply #27 on: November 04, 2010 - 06:38:06 PM »
AHHHHHHHH  :pullinghair: :banghead:  wish I had the room and funds.....
Brad
1970 Challenger 451stroker/4L60 auto OD
Barrie,Ontario,Canada
Proud to own one of the best cars ever made!!!!!

My restoration thread 
http://www.cuda-challenger.com/cc/index.php?topic=59072.0
 My handling upgrade post
http://www.cuda-challenger.com/cc/index.php?topic=73985.0

Offline moparclown

  • Resident
  • *****
  • Posts: 4335
Re: My 71 Cuda project
« Reply #28 on: November 04, 2010 - 06:57:15 PM »
One of the "interested candidates" linked above is me.  I'd be interested in knowing more; but MC's stipulation that the buyer be local or being willing to drive up and see it in person are a hanging point for those of us that are many hours away and are actually still employed.

I do have an empty garage, some free time, and a true love for the 71s though...

Jon
Hi Jon
My biggest worry is having someone be dissapointed in what they bought when it arrives to them.Second is that there are a lot of pieces and parts that go with it even as a rolling shell,complete rear frame assembly,complete doors and all of the glass and tracks needed extra gilled parts fenders,quarter skins,a roof,cowl and firewall,seats ect ect.Also this car is in project mode as far as all welding needs to be completed on the front rail install,inner fenders.I had planned on remeasuring everything once the car was fully mocked up with the engine and trans in place,just never got that far.Jon if you still have interest?e-mail me at
douglasheath48@yahoo.com
I will get pics of everything in the next day or so for you if you like?
Again I am sorry,I just don't want anyone dissapointed.
Thanks Doug

Offline quapman

  • Resident
  • *****
  • Posts: 2350
    • Auto-Grip on Facebook
Re: My 71 Cuda project
« Reply #29 on: November 04, 2010 - 07:36:39 PM »
I thought wagesofsin already bought the thing?   :clueless:
My name is Steve and I'm addicted to Challengers...