For Pro touring, handling modded, lowered cars: New SB Oil Pan -w/pics

[autoxcuda]

The 360 and 340 pan are all in stock at Milodon. Boydsdodge has received his allready.

Has anyone elso got one yet?

[HP2]

I've got mine.  I went the whole Milodon route and got a new windage tray as well.

[cudazappa]

jeez, I'm getting jealous as heck...

Just starting my taxes now *crossing figers*

[autoxcuda]

Summit now has the pans at $383 each:


340-318-273 pan:
http://www.summitracing.com/parts/MIL-31590/


360 pan:
http://www.summitracing.com/parts/MIL-31595/

[Doomed]

If I was to install the big block version, would it be a direct bolt in, or would I need a new pick up and windage tray?

Kyle.

[autoxcuda]

If I was to install the big block version, would it be a direct bolt in, or would I need a new pick up and windage tray?

Kyle.

Bolt on. Big block needs it's own pick up also. Nicer and better than stock anyway. I think the windage tray is fine as long at the pick goes through it in the same place. Might ask Milodon on that.

[autoxcuda]

Just installed my pan (and motor) last weekend...

Pictures of how precision fit the oil pan is with this 73-76 A-body spool mount type K-member. Threading a needle with the design here. This is the tightest K-member the oil pan was designed for. Also fits the 67-72 A-body type K-member much easier than the 73-76 K-member.

It fits the E and B body car fine with even more room. Much like the big block Milodon pan. 

Check this out for ground clearance!! Yes there is a pan behind that K-member. Actually 1/4" MORE clearance than stock because the stock pan has a bulge for the drain plug.

Here's the ultimate test.... Flat board is being held diagonally across k-member front passenger front to bottom of steering box drivers rear.

Awesome!!

[boydsdodge]

Who opted out of the windage tray? besides me.

[IMNCARN82]

Summit now has the pans at $383 each:


340-318-273 pan:
http://www.summitracing.com/parts/MIL-31590/


360 pan:
http://www.summitracing.com/parts/MIL-31595/

Hey, That's a better price!!!   Ya,I gotta' have one! R/T

[autoxcuda]

Hey, That's a better price!!!   Ya,I gotta' have one! R/T

Actually Summit bumped the price up to $419. Milodon said the $383 price was wrong. Soon after that it was changed.

Hughes and some others have it around $383. I'd get one before they bump/correct thier price up. Google: Milodon 31590

Jegs: $ 385.99 http://www.jegs.com/i/Milodon/697/31590/10002/-1?CT=999
 
Race Mart: $ 357.74 http://www.race-mart.com/Milodon-MIL-31590.html

[autoxcuda]

Who opted out of the windage tray? besides me.

Did you have a stud gridle or something. There's a guy with a stud gridle that just running a scraper.

[boydsdodge]

Inistalled the the factory windage tray after messing around with the milodon windage tray for too long and not liking the cuts
I had to do to get it to fit and then I would have had to close up or cut lovers to clear the rod bolts. I grabbed the stock tray with new bolts and it went in with no mods or cuts within 5 minutes.
I am happy with the pan and what I did, just head scratching that when you buy this from a single manufacturer and there own stuff doesn't fit together.
I don't get it.
The Hughes rocker shaft holdown set up I bought is another one of many head scratchers, It is a very nice set up but the studs are too short for the Edelbrock heads.
Oh well.