Author Topic: Cruise control lever knob  (Read 785 times)

Offline Giveitawack

  • Jr. Member
  • **
  • Posts: 265
    • ebay
Cruise control lever knob
« on: October 08, 2010 - 12:48:52 PM »
How is the plastic knob on the cruise control lever attached to the metal arm?
Is the plastic molded on, pressed on, threaded or glued?
I would like to disassemble it and make it look and work like new.




Offline Road_Runner

  • Sr. Member
  • ****
  • Posts: 1825
  • Mopar Owner & Standard Bearer Since 1974
Re: Cruise control lever knob
« Reply #1 on: October 08, 2010 - 12:52:13 PM »
the one on my 73 Barracuda looks slightly different than that and I've never had it off to see how it attaches, sorry.

Jim
1970 383 Roadrunner Tor Red
1973 318 Barracuda Mist Green
2014 Mustang GT/CS Convertible All Black

Offline Giveitawack

  • Jr. Member
  • **
  • Posts: 265
    • ebay
Re: Cruise control lever knob
« Reply #2 on: October 08, 2010 - 01:02:58 PM »
Maybe like this?

Offline Road_Runner

  • Sr. Member
  • ****
  • Posts: 1825
  • Mopar Owner & Standard Bearer Since 1974
Re: Cruise control lever knob
« Reply #3 on: October 08, 2010 - 01:19:12 PM »
Maybe like this?

That's it exactly.  Mine has an exposed wire than runs from that down the backside of the lever to the column. 

Later, Jim
1970 383 Roadrunner Tor Red
1973 318 Barracuda Mist Green
2014 Mustang GT/CS Convertible All Black

Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: Cruise control lever knob
« Reply #4 on: October 12, 2010 - 02:03:33 AM »
it is molded on to my knowledge

Challenger - You`ll wish You Hadn`t

Offline Giveitawack

  • Jr. Member
  • **
  • Posts: 265
    • ebay
Re: Cruise control lever knob
« Reply #5 on: October 12, 2010 - 02:03:15 PM »
OK, thanks. Then I know.