Heavily modified 70 Barracuda-6speed/Gen 3 Hemi

[pdsbartech]

If you're already at a solid state level, it's going to beat you to death. I can at least raise and lower mine 5 inches. The picture posted is with it fully raised up

[70B5Cuda]

RMS used to offer front airbags but the arm (leverage) was so short and a smaller airbag had to be used. Between the short arm and small bag, required bag pressure was so high (around 100 psi if I remember correctly) that the ride was very rough. RMS abandoned the front airbags...

[70B5Cuda]

Nice workmanship!    Curious as to what your doing for UCA's and mounts...

Thanks! Upper control arms/mounts are included with the RMS front suspension setup I bought.

[70B5Cuda]

I was excited to see the front frame rails in the car!

[RzeroB]

Crazy mad fabrication skills! Where do you guys learn how to do this kind of work? Amazing stuff! 

[70B5Cuda]

I don't know where Matt learned to do that. He's just good with metal.

[70B5Cuda]

The roof skin is now off. For the most part I was happy with the condition of the structure

[70B5Cuda]

This was an area that surprised me: the top corner of the cowl on the driver's side was pretty nasty...I'll be ordering that from 521 Restorations in the near future



The AMD roof skin is just resting in place but seems to fit well.

[johns cuda shop]

Looking Great!!

[70chall440]

Looking Great!!

 

[70B5Cuda]

Thanks guys. I appreciate the encouragement!

[70chall440]

This will be a really nice car when you are finished.

[sadil340]

You sure have my respect. My car was a piece of cake compared to the work you're doing!!