Lower control arm question......

News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1] 2

    Author Topic: Lower control arm question......  (Read 4707 times)

    Offline challenger71

    • Jr. Member
    • **
    • Posts: 358
    Lower control arm question......
    « on: December 15, 2010 - 11:42:30 PM »
    Does anyone know if the lower control arms on my 71 challenger are rebuildable? I was wondering if there was a replacement part/seal for around the "shaft"?
    Logged
    10 years in the making......


    Offline 72rtchallenger

    • Sr. Member
    • ****
    • Posts: 1734
    • 72 to 70 clone
      • cardomain
    Re: Lower control arm question......
    « Reply #1 on: December 15, 2010 - 11:50:16 PM »
    they sell the bushings if thats what you need,,some vendors on here probably have them and probably ebay
    Logged
    72rtchallenger
    my challengers restro at http://www.cardomain.com/ride/399010
    what happens in the garage
    stays in the garage

    Offline purple1

    • Sr. Member
    • ****
    • Posts: 1820
    • Worlds first e-body trailer. Member since 3/10/05
    Re: Lower control arm question......
    « Reply #2 on: December 16, 2010 - 01:05:23 PM »
    Simple answer... YES!!!

    New bushings and pins.
    Logged

    Dave


    Worlds first e-body trailer.    Severna Park, Maryland

    Offline brads70

    • C-C.com Expert
    • ********
    • Posts: 18747
    Re: Lower control arm question......
    « Reply #3 on: December 16, 2010 - 06:29:28 PM »
    Logged
    Brad
    1970 Challenger 451stroker/4L60 auto OD
    Barrie,Ontario,Canada
    Proud to own one of the best cars ever made!!!!!

    My restoration thread 
    http://www.cuda-challenger.com/cc/index.php?topic=59072.0
     My handling upgrade post
    http://www.cuda-challenger.com/cc/index.php?topic=73985.0

    Offline Katfish

    • Resident
    • *****
    • Posts: 3733
    • 70 Challenger
    Re: Lower control arm question......
    « Reply #4 on: December 18, 2010 - 02:57:52 PM »
    Don't waste your money on a greaseable control arm pin.  They don't need to be greased, the whole pin assembly rotates in the control arm.

    http://chucker54.stores.yahoo.net/coarmst.html
    Logged

    Offline autoxcuda

    • Full Member
    • ***
    • Posts: 572
      • Spring Fling
    Re: Lower control arm question......
    « Reply #5 on: December 18, 2010 - 03:29:35 PM »
    Quote from: Katfish on December 18, 2010 - 02:57:52 PM
    Don't waste your money on a greaseable control arm pin.  They don't need to be greased, the whole pin assembly rotates in the control arm.

    http://chucker54.stores.yahoo.net/coarmst.html


    If you are running stock rubber bushings, you don't use a geasable pin.

    When you are running poly bushing inserts the poly bushing act as a bearing and rotates freely (somewhat) between the pin (fixed to K-member) and LCA. That's why it's nice to grease them. The old LCA stock rubber bushing sleeves must be left on the LCA pin and inside the LCA to run them.

    Ethier way, LCA don't wear. So you can use your old ones. Unless someone bent one or jacked it up trying to remove a LCA bushing sleeve from it.
    Logged
    Spring Fling XXX
    April 22 & 23 2016
    at Woodley Park Van Nuys, CA.
    Special 30th Anniversary Event!
    600+ Mopars, 300+ swappers,  50+ manf. midways.
    Thrus: Mopar Track Day at Willow Springs Raceway
    Fri: Caravan & Cruise
    Sat: Mopar Cruise-In

    Offline 1970bumblebee

    • Jr. Member
    • **
    • Posts: 29
    Re: Lower control arm question......
    « Reply #6 on: December 22, 2010 - 11:34:34 PM »
    purple1 I have a question for you. Where did you get the bushing and pin? And who did you replace it. Are they pressed in? Any help would be great. Im in the middle of rebuilding my front end and that the only thing I cant find and find out how to replace them.
    Thanks,
    1970bumblebee
    Logged
    Mopar to ya!
    1970 Dodge Challenger R/T JS23N0B
    1971 Dodge Demon 500ci Big block

    Offline mjb765

    • Full Member
    • ***
    • Posts: 660
    Re: Lower control arm question......
    « Reply #7 on: December 22, 2010 - 11:58:33 PM »
    Quote from: 1970bumblebee on December 22, 2010 - 11:34:34 PM
    purple1 I have a question for you. Where did you get the bushing and pin? And who did you replace it. Are they pressed in? Any help would be great. Im in the middle of rebuilding my front end and that the only thing I cant find and find out how to replace them.
    Thanks,
    1970bumblebee


    See if this helps...

    http://www.moparmusclemagazine.com/tipstricks/155_0306_control_arms/index.html
    Logged

    Offline purple1

    • Sr. Member
    • ****
    • Posts: 1820
    • Worlds first e-body trailer. Member since 3/10/05
    Re: Lower control arm question......
    « Reply #8 on: December 23, 2010 - 09:25:28 AM »
    Quote from: 1970bumblebee on December 22, 2010 - 11:34:34 PM
    purple1 I have a question for you. Where did you get the bushing and pin? And who did you replace it. Are they pressed in? Any help would be great. Im in the middle of rebuilding my front end and that the only thing I cant find and find out how to replace them.
    Thanks,
    1970bumblebee


    It has been a few years... So here goes...

    I did this all my self. No press. I got the tools made by American Muscle.
    Link to the website: http://www.americanmuscle.biz/Suspension_Tools_s/1.htm

    I got a complete front end kit from PST. It came with the rubber lower control arm bushings. I think I got the pins for stock type bushings from Just Suspensions. After I got mine off they were messed up in the threads. So I had to get the new ones. I did all of it at once with the "Pro kit" and the "Lower control arm bushing sleeve remover".

    The right tools made all the difference.  :2cents:

    Edit: Links.
    http://www.p-s-t.com/
    http://justsuspension.com/
    « Last Edit: December 23, 2010 - 09:38:33 AM by purple1 »
    Logged

    Dave


    Worlds first e-body trailer.    Severna Park, Maryland

    Offline 1970bumblebee

    • Jr. Member
    • **
    • Posts: 29
    Re: Lower control arm question......
    « Reply #9 on: December 23, 2010 - 09:48:47 AM »
    That was sooooo.... much help!!!! Thanks ALOT!!! Looks like I know what Im doing this weekend!!! lol hopefully I get some good presents from the girlfriend to!! lol "Mopar Collectors Guide" subscription!
    Logged
    Mopar to ya!
    1970 Dodge Challenger R/T JS23N0B
    1971 Dodge Demon 500ci Big block

    Offline purple1

    • Sr. Member
    • ****
    • Posts: 1820
    • Worlds first e-body trailer. Member since 3/10/05
    Re: Lower control arm question......
    « Reply #10 on: December 23, 2010 - 10:22:42 AM »
     :2thumbs: !!!

    Glad to help. Let us know how it goes.
    Logged

    Dave


    Worlds first e-body trailer.    Severna Park, Maryland

    Offline RB2929

    • Full Member
    • ***
    • Posts: 868
    Re: Lower control arm question......
    « Reply #11 on: December 23, 2010 - 10:24:04 AM »
    I bought the complete tool kit from American Muscle.
    The tools worked great, expect one minor issue.  The T-Bar removal tool, I broke one of the four bolts while taking the T-Bar out.  But, I couldn’t imagine trying to get the T-Bar out w/o the tool.
    Also, PST has the LCA re-enforcement plates for about $20.  My brother works in a welding shop, so we made our own.  I think it’s a worthwhile mod, my LCAs were spreading apart by about a quarter inch on the top portion.  The plates pulled the sides together and will last longer than me.
    Hope that helps.
    Logged

    Offline purple1

    • Sr. Member
    • ****
    • Posts: 1820
    • Worlds first e-body trailer. Member since 3/10/05
    Re: Lower control arm question......
    « Reply #12 on: December 23, 2010 - 10:34:28 AM »
    The only trouble I had was the "all" thread" they give you gets messed up as you use the tools. I got some from the local hardware store and moved on. Getting some extra hardware (nuts and washers for the all thread) doesn't hurt either.
    Logged

    Dave


    Worlds first e-body trailer.    Severna Park, Maryland

    Offline ChallengerHK

    • Sr. Resident
    • ******
    • Posts: 7338
    • I'm working on it - No, really
    Re: Lower control arm question......
    « Reply #13 on: December 23, 2010 - 11:11:14 AM »
    Quote from: RB2929 on December 23, 2010 - 10:24:04 AM
    I bought the complete tool kit from American Muscle.
    The tools worked great, expect one minor issue.  The T-Bar removal tool, I broke one of the four bolts while taking the T-Bar out.  But, I couldn’t imagine trying to get the T-Bar out w/o the tool.

    I had lots of trouble with mine until Neil posted tips for how to get them out. After that, it was pretty easy, no tool required. Those tips are still on here somewhere.
    Logged


    "She'll make point five past light speed. She may not look like much, but she's got it where it counts, and I've made a lot of special modifications myself."

    - Han Solo, Star Wars

    Advice Thread - Taking Pictures Of Cars

    Offline brads70

    • C-C.com Expert
    • ********
    • Posts: 18747
    Re: Lower control arm question......
    « Reply #14 on: December 23, 2010 - 04:44:22 PM »
    Quote from: ChallengerHK on December 23, 2010 - 11:11:14 AM
    I had lots of trouble with mine until Neil posted tips for how to get them out. After that, it was pretty easy, no tool required. Those tips are still on here somewhere.

     :wave: Hi David!
    Would you happen to have a link to Neil's tips?
    Logged
    Brad
    1970 Challenger 451stroker/4L60 auto OD
    Barrie,Ontario,Canada
    Proud to own one of the best cars ever made!!!!!

    My restoration thread 
    http://www.cuda-challenger.com/cc/index.php?topic=59072.0
     My handling upgrade post
    http://www.cuda-challenger.com/cc/index.php?topic=73985.0
    Pages: [1] 2
    « previous next »