News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: Hedman 78038 Elite Hedders  (Read 4446 times)

    Offline dodj

    • Sr. Resident
    • ******
    • Posts: 6197
    Hedman 78038 Elite Hedders
    « on: January 09, 2011 - 10:41:14 PM »
    I recently installed a set of Hedman 78038 Elite hedders on the Challenger. I'm impressed! They clear the steering box by about an inch. Clears the torsion bar by about the same amount and about a half inch clearance to the starter. Not a single dent required on either the driver's or passenger side hedder.  :2thumbs:
    Logged
    Scott
    1973 Challenger  440 4 spd 
    2007.5 3500 6.7 Cummins Diesel, Anarchy tuned.
    Good friends don't let friends do stupid things. ........alone.


    Offline brads70

    • C-C.com Expert
    • ********
    • Posts: 18747
    Re: Hedman 78038 Elite Hedders
    « Reply #1 on: January 10, 2011 - 02:38:51 AM »
    Logged
    Brad
    1970 Challenger 451stroker/4L60 auto OD
    Barrie,Ontario,Canada
    Proud to own one of the best cars ever made!!!!!

    My restoration thread 
    http://www.cuda-challenger.com/cc/index.php?topic=59072.0
     My handling upgrade post
    http://www.cuda-challenger.com/cc/index.php?topic=73985.0

    Offline dodj

    • Sr. Resident
    • ******
    • Posts: 6197
    Re: Hedman 78038 Elite Hedders
    « Reply #2 on: January 10, 2011 - 09:08:39 PM »
    A pic
    Logged
    Scott
    1973 Challenger  440 4 spd 
    2007.5 3500 6.7 Cummins Diesel, Anarchy tuned.
    Good friends don't let friends do stupid things. ........alone.

    Offline brads70

    • C-C.com Expert
    • ********
    • Posts: 18747
    Re: Hedman 78038 Elite Hedders
    « Reply #3 on: January 10, 2011 - 09:26:51 PM »
    Have you run the engine yet? Mine leaked because they were held up on the head casting at the top of the header flange. I had to grind down the head casting some and double gasket it to get it to seal. :pullinghair: Yours sure fit 10x better than mine did!
    Logged
    Brad
    1970 Challenger 451stroker/4L60 auto OD
    Barrie,Ontario,Canada
    Proud to own one of the best cars ever made!!!!!

    My restoration thread 
    http://www.cuda-challenger.com/cc/index.php?topic=59072.0
     My handling upgrade post
    http://www.cuda-challenger.com/cc/index.php?topic=73985.0

    Offline coupman35

    • Full Member
    • ***
    • Posts: 506
    • It going to be FUN
    Re: Hedman 78038 Elite Hedders
    « Reply #4 on: January 10, 2011 - 09:27:29 PM »
    Looks like they fit pretty good .Like them valve cover to just like the one i just got LOL
    Logged
    1941 Dodge truck 340cu
    1935 ford 3window coupe 327cu
    1965 Acadian Beaumont Convertible 283cu
    1973 Challenger 318cu

    Offline dodj

    • Sr. Resident
    • ******
    • Posts: 6197
    Re: Hedman 78038 Elite Hedders
    « Reply #5 on: January 10, 2011 - 10:52:53 PM »
    No, I haven't run the engine yet. I need to cut the older style flange off the exhaust system and weld on the ball socket type. I hope I don't have a leak at the head. I scraped it and then smoothed it with scotch-brite so I'm hoping for a good seal.
    Logged
    Scott
    1973 Challenger  440 4 spd 
    2007.5 3500 6.7 Cummins Diesel, Anarchy tuned.
    Good friends don't let friends do stupid things. ........alone.

    Offline troutstreamnm

    • Sr. Member
    • ****
    • Posts: 1190
    Re: Hedman 78038 Elite Hedders
    « Reply #6 on: January 10, 2011 - 11:41:52 PM »
    Those Headman's look pretty good.  You know I have read lots of posts on headers and all the problems people have with fit when buying inexpensive units.  Agreed they are all a PITA to some degree, but why cause such major grief by buying cheap headers?  Some pics show pipes necked down so much it totally defeats the point of installing the header.  :screwy: I have installed two sets of TTi headers on my cars (BB B-Body and BB E-Body) that both fit like a glove and have had no leaks.  Yes, they are expensive and I've been lucky to be able to afford them, but it's worth saving a little longer if you can reduce your stress level.  :2cents:
    « Last Edit: January 11, 2011 - 08:51:03 AM by troutstreamnm »
    Logged
    08 SRT-8 Challenger
    71 GA4 Challenger
    70 FK5 Charger 500

    Offline tommyg29

    • Resident
    • *****
    • Posts: 2706
    Re: Hedman 78038 Elite Hedders
    « Reply #7 on: January 11, 2011 - 08:11:02 AM »
    Brad,
    sure looks to me like they used your car as a guinea pig :poopoke:
    Logged
    72 Roadrunner 400-4 Auto-3.23 Gear-Black Cruiser
    71 Cuda 440-6 Tribute-Limelight-A833 Close Ratio-4 Sp-Pistol Grip-Dana 3.54 Powr Lok-Rally Dash-Shaker (Sold)
    92 Dodge Stealth RT-Twin 15g Turbos-SAFC2 Tuned-Mystic Blue-5 Sp-AWD-Rear Wheel Steering-AutoX'r (Sold)
    12 Dodge Charger SXT Plus Blacktop Package-3.6L-8 Sp-Leather-Nav (the wife's)

    Multiple SRT's, Rams, Dakotas, Caravans and Neons

    ...the lines on the road just look like dots!....

    Offline brads70

    • C-C.com Expert
    • ********
    • Posts: 18747
    Re: Hedman 78038 Elite Hedders
    « Reply #8 on: January 11, 2011 - 08:56:41 AM »
    Quote from: tommyg29 on January 11, 2011 - 08:11:02 AM
    Brad,
    sure looks to me like they used your car as a guinea pig :poopoke:

     :lol:
    Logged
    Brad
    1970 Challenger 451stroker/4L60 auto OD
    Barrie,Ontario,Canada
    Proud to own one of the best cars ever made!!!!!

    My restoration thread 
    http://www.cuda-challenger.com/cc/index.php?topic=59072.0
     My handling upgrade post
    http://www.cuda-challenger.com/cc/index.php?topic=73985.0

    Offline tommyg29

    • Resident
    • *****
    • Posts: 2706
    Re: Hedman 78038 Elite Hedders
    « Reply #9 on: January 11, 2011 - 01:18:54 PM »
    ok, not saying your car is a pig.
    Lets call it a test mule :roflsmiley:
    Logged
    72 Roadrunner 400-4 Auto-3.23 Gear-Black Cruiser
    71 Cuda 440-6 Tribute-Limelight-A833 Close Ratio-4 Sp-Pistol Grip-Dana 3.54 Powr Lok-Rally Dash-Shaker (Sold)
    92 Dodge Stealth RT-Twin 15g Turbos-SAFC2 Tuned-Mystic Blue-5 Sp-AWD-Rear Wheel Steering-AutoX'r (Sold)
    12 Dodge Charger SXT Plus Blacktop Package-3.6L-8 Sp-Leather-Nav (the wife's)

    Multiple SRT's, Rams, Dakotas, Caravans and Neons

    ...the lines on the road just look like dots!....

    Offline brads70

    • C-C.com Expert
    • ********
    • Posts: 18747
    Re: Hedman 78038 Elite Hedders
    « Reply #10 on: January 11, 2011 - 01:45:53 PM »
    Quote from: tommyg29 on January 11, 2011 - 01:18:54 PM
    ok, not saying your car is a pig.
    Lets call it a test mule :roflsmiley:

    Oh it can be a pig....it eats all my money? :biggrin:
    Logged
    Brad
    1970 Challenger 451stroker/4L60 auto OD
    Barrie,Ontario,Canada
    Proud to own one of the best cars ever made!!!!!

    My restoration thread 
    http://www.cuda-challenger.com/cc/index.php?topic=59072.0
     My handling upgrade post
    http://www.cuda-challenger.com/cc/index.php?topic=73985.0

    Offline DocMel

    • Full Member
    • ***
    • Posts: 828
    Re: Hedman 78038 Elite Hedders
    « Reply #11 on: January 12, 2011 - 03:22:48 PM »
    Ive got the same on my 71 440 barracuda.   Good fit, no harder to get them in than any old chvies Ive had, and I have about 4-5000 miles on them,  no leaks

    For you folks running NON STOCK heads.   Non stock heads tend to bring up fitment issues and chassis clearance issues
    Logged
    Pages: [1]
    « previous next »