Goodysgotacuda - Wheel and tire specs

Author Topic: Goodysgotacuda - Wheel and tire specs  (Read 27862 times)

Offline GoodysGotaCuda

  • Sr. Resident
  • ******
  • Posts: 5392
Goodysgotacuda - Wheel and tire specs
« on: January 13, 2011 - 12:01:11 PM »
I've had about a million PMs and questions regarding the specs of my wheels and tires over the last few years. I figured I'd go ahead and make this an eternal thread I can reference them to for the same information.

Rims
American Racing Torque Thrust M's
Front - 17x8 with 4.5" backspacing
Rear - 18x9 with 5.9" backspacing

Notes - The rear 18s are running 3/4" wheel spacers to keep the tire off the spring. The axle has 3" studs to allow for proper lug engagement with the thick aluminum wheel and spacers. Also, that particular wheel has a different size hub for the 17 and 18. The 18" wheel will NOT fit on the front without modifying the hub on the car, or the wheel. I stumbled upon this when I got the 18s first and I wanted to just try them on the front.

Tires - Nitto 555
Front - 255/45/17
Rear - 295/45/18

Suspension
Front ride height - 24 1/2" from the ground to the center of the wheel well.
Rear ride height - 26"

Front suspension is stock torsion bar suspension. The rear has super stock leaf springs with 1" lowering blocks. (~about stock height)

Rear clearances - 1/2" from the tire to the leaf spring, and 1/2" from the tire to the 1/4 panel. 1" for the same locations, but to the actual rim lip.

« Last Edit: April 24, 2012 - 10:23:03 PM by GoodysGotaCuda »
Build Page: Goody's 'Cuda Build Page
1976 Dodge Warlock
1972 Barracuda - 5.7 Hemi + T56 Magnum

Wheel & Tire Specs:Link




Offline Cuda Cody

  • Resident
  • *****
  • Posts: 3988
  • Vancouver, WA
Re: Goodysgotacuda - Wheel and tire specs
« Reply #1 on: January 13, 2011 - 01:58:57 PM »
Great post!  Thanks for the information and your set up looks fantastic!
The funniest thing about this particular signature is that by the time you realize it doesn't say anything it's to late to stop reading it.

Offline Doomed

  • Jr. Member
  • **
  • Posts: 354
  • So close...to actually finishing my 'Cuda!
Re: Goodysgotacuda - Wheel and tire specs
« Reply #2 on: January 13, 2011 - 04:59:31 PM »
You nailed it...perfect choices.

Kyle.
"Life gets in the way of Living"

Offline GoodysGotaCuda

  • Sr. Resident
  • ******
  • Posts: 5392
Re: Goodysgotacuda - Wheel and tire specs
« Reply #3 on: January 13, 2011 - 10:52:16 PM »
Thanks guys  :cheers:
Build Page: Goody's 'Cuda Build Page
1976 Dodge Warlock
1972 Barracuda - 5.7 Hemi + T56 Magnum

Wheel & Tire Specs:Link

Offline Aussie Challenger

  • Resident
  • *****
  • Posts: 3407
  • In Kansas loaded for Drive to West Coast.
Re: Goodysgotacuda - Wheel and tire specs
« Reply #4 on: January 15, 2011 - 01:53:24 AM »
Goody should that read for the rear 295/45/18, you have 17?   :cheers:
Dave

Offline miketyler

  • Resident
  • *****
  • Posts: 2561
    • www.miketyler.net
Re: Goodysgotacuda - Wheel and tire specs
« Reply #5 on: January 15, 2011 - 06:48:58 AM »
great pics!
72' Cuda restomod
70 Mustang Mach 1
07' Toyota Tacoma Prerunner Dbl cab in Speedway Blue!
01' Honda 1100 Shadow Sabre
96' Seadoo Challenger

Offline dodj

  • Sr. Resident
  • ******
  • Posts: 6197
Re: Goodysgotacuda - Wheel and tire specs
« Reply #6 on: January 15, 2011 - 06:52:28 AM »
Goody should that read for the rear 295/45/18, you have 17?   :cheers:
They were probably pretty tough to put on.  ;D
Set up looks good, Goody!
Scott
1973 Challenger  440 4 spd 
2007.5 3500 6.7 Cummins Diesel, Anarchy tuned.
Good friends don't let friends do stupid things. ........alone.

Offline GoodysGotaCuda

  • Sr. Resident
  • ******
  • Posts: 5392
Re: Goodysgotacuda - Wheel and tire specs
« Reply #7 on: January 15, 2011 - 08:03:22 AM »
Goody should that read for the rear 295/45/18, you have 17?   :cheers:

Yep, thanks!
Build Page: Goody's 'Cuda Build Page
1976 Dodge Warlock
1972 Barracuda - 5.7 Hemi + T56 Magnum

Wheel & Tire Specs:Link

Offline GoodysGotaCuda

  • Sr. Resident
  • ******
  • Posts: 5392
Re: Goodysgotacuda - Wheel and tire specs
« Reply #8 on: February 28, 2012 - 03:22:23 PM »
Updated pics




Build Page: Goody's 'Cuda Build Page
1976 Dodge Warlock
1972 Barracuda - 5.7 Hemi + T56 Magnum

Wheel & Tire Specs:Link

Offline Super Blue 72

  • Permanent Resident
  • *******
  • Posts: 12711
  • "Big 'n Little" Member since 8/9/05
    • Phil's Super Blue '72
Re: Goodysgotacuda - Wheel and tire specs
« Reply #9 on: February 28, 2012 - 06:30:39 PM »
Looking great, Mike!  :thumbsup:
1972 Dodge Challenger Rallye 340, AT, Code TB3=Super Blue, SBD=8/17/1971.  Yes, a Rallye without the fender louvers from the factory because of the body side molding option.

Pic #2 and 3 of my ARII 1/24 scale model car 

Phil in New England-Massachusetts  Always thank God for what you have!

http://www.cardomain.com/ride/456046/1972-dodge-challenger

Offline 383 six pack

  • Jr. Member
  • **
  • Posts: 13
Re: Goodysgotacuda - Wheel and tire specs
« Reply #10 on: February 28, 2012 - 06:40:39 PM »
love the new picture the car looks great has the right stance  :2thumbs:

Offline Doomed

  • Jr. Member
  • **
  • Posts: 354
  • So close...to actually finishing my 'Cuda!
Re: Goodysgotacuda - Wheel and tire specs
« Reply #11 on: March 02, 2012 - 08:36:59 PM »
Right on, looking amazing!!!

Kyle.
"Life gets in the way of Living"

Offline GoodysGotaCuda

  • Sr. Resident
  • ******
  • Posts: 5392
Re: Goodysgotacuda - Wheel and tire specs
« Reply #12 on: March 23, 2012 - 10:25:43 AM »
Thanks guys  :cheers:
Build Page: Goody's 'Cuda Build Page
1976 Dodge Warlock
1972 Barracuda - 5.7 Hemi + T56 Magnum

Wheel & Tire Specs:Link

Offline 360FISH

  • Full Member
  • ***
  • Posts: 705
  • BS23H3B567746
Re: Goodysgotacuda - Wheel and tire specs
« Reply #13 on: July 29, 2012 - 11:00:36 PM »
Fantastic!      :clapping:

Inspirational!   :worshippy

Thanks for sharing...    :picture:
1973 ‘Cuda   Semi-Pro Touring
360 SB - 518/OD auto tranny - FAST EZ EFI - Edelbrock Fuel sump - HHR fan
Hella H4 headlights on relays - 97 Dodge Avenger seats - Chin spoiler - Bumpers pulled in to ’72 offset

Build: http://www.cuda-challenger.com/cc/index.php?topic=74674.0

Offline LEMOOREACE

  • Jr. Member
  • **
  • Posts: 193
  • I was a llama, but I have since evolved.
Re: Goodysgotacuda - Wheel and tire specs
« Reply #14 on: September 16, 2012 - 02:05:11 PM »
I am duplicating your wheel/tire combo because it looks perfect IMO but going with polished version vice the black.  I need to know what lug nuts you used (especially for the rears with the spacers and 3" studs).   
« Last Edit: September 16, 2012 - 02:09:55 PM by LEMOOREACE »