4 speed shifter boot and trim ring mounting

[7Dcuda]

How does the 4 speed shifter boot and trim ring mount to the center hump on a 70 Cuda?  I currently have an auto trans. that Im fixing to replace with a 4 speed.  Currently have a Hurst Pro Matic 2 shifter.  Wondering if Im gonna have any issues with installing the 4 speed boot and trim ring not knowing how they install.  I do not plan on having the center console.  Does the boot and trim ring just screw directly into the center tunnel hump?    Also, if anyone can post a pic of their Cuda 4 speed without the console I'd appreciate it.   

[72rtchallenger]

it just screws down,,have you installed the 4 spd hump yet?

[7Dcuda]

ok, thanks.  4 speed hump is already there, car was originally a manual from the factory....some doofus somewhere along the line put an auto in.   Not knowing yet what was done to put the auto floor shifter in I was just wondering if whatever was done  might possibly interfere with putting the manual boot and trim ring in.   

it just screws down,,have you installed the 4 spd hump yet?

[mopardave]

4 screws through the boot, 4 screws through the trim ring.

[7Dcuda]

Are there nut plates or do the screws just screw directly into the hump?

4 screws through the boot, 4 screws through the trim ring.

[cwestra]

Are there nut plates or do the screws just screw directly into the hump?

Just chromed sheet metal screws.

[7Dcuda]

Cool...thanks.

Just chromed sheet metal screws.