dash cap

News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1] 2

    Author Topic: dash cap  (Read 5141 times)

    Offline jackie

    • Jr. Member
    • **
    • Posts: 138
    dash cap
    « on: February 02, 2011 - 03:56:51 PM »
    does anyone make a dash cap for a 1970 challenger? if not can you remove the pad without removing the dash?
    Logged
    1970 challenger r/t, prostreet 438 ci. 4 speed


    Offline tomsa

    • Jr. Member
    • **
    • Posts: 201
      • My cars in swedish
    Re: dash cap
    « Reply #1 on: February 02, 2011 - 05:24:58 PM »
    Logged

    Offline jackie

    • Jr. Member
    • **
    • Posts: 138
    Re: dash cap
    « Reply #2 on: February 03, 2011 - 07:29:39 AM »
    how did it turn out?
    Logged
    1970 challenger r/t, prostreet 438 ci. 4 speed

    Offline brads70

    • C-C.com Expert
    • ********
    • Posts: 18747
    Re: dash cap
    « Reply #3 on: February 03, 2011 - 07:37:22 AM »
    Logged
    Brad
    1970 Challenger 451stroker/4L60 auto OD
    Barrie,Ontario,Canada
    Proud to own one of the best cars ever made!!!!!

    My restoration thread 
    http://www.cuda-challenger.com/cc/index.php?topic=59072.0
     My handling upgrade post
    http://www.cuda-challenger.com/cc/index.php?topic=73985.0

    Offline tomsa

    • Jr. Member
    • **
    • Posts: 201
      • My cars in swedish
    Re: dash cap
    « Reply #4 on: February 03, 2011 - 10:11:07 AM »
    It looks fine to me.
    Mine was missing the pressed down mark for the challenger logo at the passanger side :(
    But it was for 1970 modell

    About the sun I don´t have a clue because either the car or the dash have seen the sun yet :)

    Logged

    Offline 422STROKER

    • Sr. Resident
    • ******
    • Posts: 5386
    • Member Since 6/3/06
    Re: dash cap
    « Reply #5 on: February 03, 2011 - 10:25:56 AM »
    I've had mine on for a few years now, little warping around the defroster vents so far.  I got mine on ebay for like 90 bucks a few years ago.  Car sees regular use and plenty of sun. 

    Tom



    Logged
    Tom
    12.77 @ 108.87 15" Street Drag radial tires 3.23 gear

    Offline dodj

    • Sr. Resident
    • ******
    • Posts: 6197
    Re: dash cap
    « Reply #6 on: February 03, 2011 - 10:26:20 AM »
    Quote from: brads70 on February 03, 2011 - 07:37:22 AM
    How do you like it? Any issues in the sun? I hear some have issues warping when they sit in the sun?
    IMO they are junk. Mine looked decent when I first put it on, but after being in the sun a couple times it warped and split.
    Logged
    Scott
    1973 Challenger  440 4 spd 
    2007.5 3500 6.7 Cummins Diesel, Anarchy tuned.
    Good friends don't let friends do stupid things. ........alone.

    Offline jackie

    • Jr. Member
    • **
    • Posts: 138
    Re: dash cap
    « Reply #7 on: February 03, 2011 - 02:50:05 PM »
    so this thing just gets glued on top for the old pad? has anyone put one with one speaker hole on top of a three speaker dash. i don't have a radio anyway. also can you remove the old cover without removing the dash?
    Logged
    1970 challenger r/t, prostreet 438 ci. 4 speed

    Offline MEK-Dangerfield

    • C-C.com Expert
    • ********
    • Posts: 20946
    • I don't get NO respect! Member since 1/25/2002
    Re: dash cap
    « Reply #8 on: February 03, 2011 - 04:10:26 PM »
    Quote from: jackie on February 03, 2011 - 02:50:05 PM
    so this thing just gets glued on top for the old pad? has anyone put one with one speaker hole on top of a three speaker dash. i don't have a radio anyway. also can you remove the old cover without removing the dash?

    1. - Yes it gets glued on.

    2. - When I bought my car it had a single speaker dash cap while the car came with 3 speakers up front.

    3. - You glue the dash cap over the old dash pad, if that is what you're asking. I believe the best way to do this is remove the dash, or at least have the front window removed.
    Logged

    Mike

    1970 Challenger - SOLD
    2016 SXT+.  1 of 524 SXT+'s in Plumb-crazy for 2016.

    Offline ShelbyDogg

    • Sr. Resident
    • ******
    • Posts: 5007
    Re: dash cap
    « Reply #9 on: February 03, 2011 - 11:49:48 PM »
    Quote from: jackie on February 02, 2011 - 03:56:51 PM
    does anyone make a dash cap for a 1970 challenger? if not can you remove the pad without removing the dash?


    Here are the hidden "nuts" to take off if trying to pull off the dash pad from the frame.
    Don't for get the 2 visible screws  by the door and windshield pillar.



    You can get to these by taking out the cluster and glove box liner
    but it would be easier to take out the column and drop the dash out.



    « Last Edit: February 04, 2011 - 11:13:24 AM by ShelbyDogg »
    Logged
    Rob

    3 E-bodies, Megasquirt-1v3.0, Edelbrock Pro-Flo-1, Holley C950, FAST EZ-EFI; say no to carbs...yes to throttle bodies

    My Pace Car restoration thread:
    http://www.cuda-challenger.com/cc/index.php?topic=44869.0

    Offline jackie

    • Jr. Member
    • **
    • Posts: 138
    Re: dash cap
    « Reply #10 on: February 04, 2011 - 10:34:56 AM »
    so it is easier to remove the whole dash? thanks for the pic's. do you also have info. on the bolts for the dash. thanks, jackie
    Logged
    1970 challenger r/t, prostreet 438 ci. 4 speed

    Offline ShelbyDogg

    • Sr. Resident
    • ******
    • Posts: 5007
    Re: dash cap
    « Reply #11 on: February 04, 2011 - 11:12:11 AM »
    I find it easier to pull the whole dash out but there are lots of things to do before you can drop it out. A few things are dropping the column to the floor after taking out the seat, Unscrewing the bulkhead (fusebox and connectors) from the dash, and disconnecting any heater control cables and wires.

    After loosening the 2 side nuts under the kick panels, the dash rotates down and out after taking out the 4 screws at rhe defroster vents.

    I know MEK-Danger replaced his dash pad without pulling the dash out so he might want to say how hard or easy it was to do that. But for me, I can pull a column and dash out fairly quickly.
    « Last Edit: February 04, 2011 - 11:15:57 AM by ShelbyDogg »
    Logged
    Rob

    3 E-bodies, Megasquirt-1v3.0, Edelbrock Pro-Flo-1, Holley C950, FAST EZ-EFI; say no to carbs...yes to throttle bodies

    My Pace Car restoration thread:
    http://www.cuda-challenger.com/cc/index.php?topic=44869.0

    Offline MEK-Dangerfield

    • C-C.com Expert
    • ********
    • Posts: 20946
    • I don't get NO respect! Member since 1/25/2002
    Re: dash cap
    « Reply #12 on: February 04, 2011 - 12:40:31 PM »
    Quote from: ShelbyDogg on February 04, 2011 - 11:12:11 AM

    I know MEK-Danger replaced his dash pad without pulling the dash out so he might want to say how hard or easy it was to do that. But for me, I can pull a column and dash out fairly quickly.

    It was no day at the beach, that's for sure. You need a short 3/8" wrench to get those 3 speednuts up by the windshield. It helps if you are a contortionist too.   :grinyes:
    Logged

    Mike

    1970 Challenger - SOLD
    2016 SXT+.  1 of 524 SXT+'s in Plumb-crazy for 2016.

    Offline IMNCARN82

    • Resident
    • *****
    • Posts: 3547
    • LeDZeP
    Re: dash cap
    « Reply #13 on: February 04, 2011 - 12:48:49 PM »
    I have a cap. Didn't bother glueing it.Once I saw the difference,Really wanted a new pad.There is no comparison IMO. Looks cheap because it is. I'm not saying caps can't be made to look/fit good.It is just a place I'd spend/save for a proper replacement.It's the dash...everyone looks at it.And you see it everytime you drive. Removing the dash isn't too hard,Just takes time. If you pull it,You might want to consider doing some other stuff too while it's out....
    Logged
    '73 340 5 speed,RMS,BAER,... "Supercuda" (O[   ]||||[   ]O)  
    '69 Dodge Charger 383,Auto                  (OiiiiiiiiiiIiiiiiiiiiiO)
    13' Challenger R/T BlacktoP  6spd. (OO________OO)
    71' Demon
    75' Duster
    87' Conquest TSI
    56' Plaza
    Boulder CO
    Robert    "cuda bob"

    Offline MEK-Dangerfield

    • C-C.com Expert
    • ********
    • Posts: 20946
    • I don't get NO respect! Member since 1/25/2002
    Re: dash cap
    « Reply #14 on: February 04, 2011 - 03:13:30 PM »
    Quote from: IMNCARN82 on February 04, 2011 - 12:48:49 PM
    I have a cap. Didn't bother glueing it.Once I saw the difference,Really wanted a new pad.There is no comparison IMO. Looks cheap because it is. I'm not saying caps can't be made to look/fit good.It is just a place I'd spend/save for a proper replacement.It's the dash...everyone looks at it.And you see it everytime you drive. Removing the dash isn't too hard,Just takes time. If you pull it,You might want to consider doing some other stuff too while it's out....

    My big beef with having a cap was I hated the hard plastic feel of it. It didn't look bad though, so I can see going this way on a budget. I swapped mine out for a new pad. I'm glad I did.
    Logged

    Mike

    1970 Challenger - SOLD
    2016 SXT+.  1 of 524 SXT+'s in Plumb-crazy for 2016.
    Pages: [1] 2
    « previous next »