post pics of your challenger exhaust.

[RyanTurboTypeR]

looking to do 3 or 3.5" stainless steel exhaust on my car with stock tips. does anyone have a nice set up or know any companies that make it.

[femtnmax]

This is what I put together out of 3 " collectors to 3" Summit X-pipe, then after "X" reduced to 2 1/2".  You could stay 3" all the way like you want.  What I did not saying its the best, but it turned out ok.
http://www.cuda-challenger.com/cc/index.php?topic=72918.0

[72rtchallenger]

heres my 3" magnaflow setup,,sorry i dont have more pictures,,the magnaflow kits are nice but if you have no experience putting on an exhaust system,take it to a professional 

[coupman35]

Here some of my 73 2 1/2 inch

[femtnmax]

Also, the Dynomax super turbo 3 inch mufflers are actually a 2 1/2 inch muffler with a step up in pipe diameter to 3 inch OUTSIDE the muffler.  So not a true 3 inch thru the muffler.  I made that mistake.  Buy someone elses true 3 inch muffler, such as Magnaflow or such.

[EbodyPro572]

I decided to use the magnaflow SS 3" in/out mufflers.  Presently looking for a fab shop around the detroit/ann arbor/flint, MI area to make/install the system.  Dave, at Roseville, suggested Slim's here in the MI area who I'm gonna call this week.  I just don't know of any 'stainless exhaust kits' to fit the challenger.

[72rtchallenger]

I decided to use the magnaflow SS 3" in/out mufflers.  Presently looking for a fab shop around the detroit/ann arbor/flint, MI area to make/install the system.  Dave, at Roseville, suggested Slim's here in the MI area who I'm gonna call this week.  I just don't know of any 'stainless exhaust kits' to fit the challenger.

magnaflow sells the whole kit with 3" x pipe system,,pricey but nice