Author Topic: How to determine what emergency brake setup my 73 challenger had  (Read 1703 times)

Offline Grec

  • The '73 Chrysler should have made...
  • Full Member
  • ***
  • Posts: 974
How to determine what emergency brake setup my 73 challenger had
« on: February 19, 2011 - 11:58:50 PM »
The car has zero hardware from the original ebrake setup on it. From what I can tell, there's two possible types that could be found in a 73: one version with the intermediate cable, and one without.

Is there a bracket or some other clue under the car that I need to look for to determine which set I need? Or since I'm starting from scratch, does it matter?

Thanks.
1973 Challenger Rallye
- 440 Six Pack
- A833 4 Speed, 18 Spline
- FE5 Rallye Red on Black




Offline Bullitt-

  • Permanent Resident
  • *******
  • Posts: 12167
  • Better Things To Come Member Since 2/16/06
Re: How to determine what emergency brake setup my 73 challenger had
« Reply #1 on: February 20, 2011 - 12:19:13 AM »
I think by '73 only one setup was used with intermediate cable
Kits avail. http://www.inlinetube.com/

Hope this helps
http://www.inlinetube.com/Brake%20Cables/Brake%20cable%20instruction%20sheets/70-74%20Mopar%20No%20Inter.pdf
Wade  73 Rallye 340..'77 Millennium Falcon...13 R/T Classic   Huntsville, AL
Screwed by Photobucket!