rear end spool interchange question

News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: rear end spool interchange question  (Read 1491 times)

    Offline purple6popper

    • Jr. Member
    • **
    • Posts: 138
      • pics of my projects
    rear end spool interchange question
    « on: December 03, 2004 - 05:13:40 PM »
    found a 76 power wagon in a wrecking yard today which appears to have a limited slip rear end.
    rear cover has 12 bolts on it, and like i said it's a 76.

    will the spool from this axle fit an 8 3/4 carrier? read somewhere some center carriers interchanged, but don't remember which.

    this weekend is 24.95 rear ends, so would be nice to pick it up for that, but money wasted if it won't go in. probably a cone tyoe, but for $25, still worth it.
    Logged
    I found the meaning of life once, but forgot to write it down.


    Offline Chryco Psycho

    • Administrator
    • C-C.com Guru
    • *****
    • Posts: 36620
    • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
    Re: rear end spool interchange question
    « Reply #1 on: December 03, 2004 - 06:59:30 PM »
    no it will not work , if it has a removable rear cover the ring gears is a different size & it will not fit
    Logged

    Challenger - You`ll wish You Hadn`t

    Offline purple6popper

    • Jr. Member
    • **
    • Posts: 138
      • pics of my projects
    Re: rear end spool interchange question
    « Reply #2 on: December 03, 2004 - 10:52:29 PM »
    ok, found it. dana 60 center sections supposedly interchange.

    http://www.68cuda.com/rear.html
    9 ¾ AKA Dana 60
    Introduced in 1966. This rear end was not offered in A body cars except for the Hemi. The early rear ends were 23 tooth "Power Lok" (1966 - 1969) differentials. In 1970 the 9 ¾ went to 35 tooth axle shafts and were called "Track Lok" differentials. These particular ones will interchange with 8 ¾ axles, bearings and seals.
    Info: 10-bolt cover
    Logged
    I found the meaning of life once, but forgot to write it down.

    Offline Chryco Psycho

    • Administrator
    • C-C.com Guru
    • *****
    • Posts: 36620
    • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
    Re: rear end spool interchange question
    « Reply #3 on: December 04, 2004 - 01:31:27 AM »
    The 8 3/4 diff uses they same axle brgs & seals as the car application Dana 60 ... yes
     But the sure grip unit is designed for a 9 3/4 " ring gear , how do you intend to streatch the 8 3/4 " gear onto the sure grip case ??? 
    Logged

    Challenger - You`ll wish You Hadn`t

    Offline purple6popper

    • Jr. Member
    • **
    • Posts: 138
      • pics of my projects
    Re: rear end spool interchange question
    « Reply #4 on: December 04, 2004 - 12:25:56 PM »
    ummmm, magic.  ;D (i do have a lincoln 9 1/4 which will fit in a ferd 9 with a small notch in the housing)

    that's why i was asking you guys, instead of believing everything i read.

    one in the yard isn't a dana anyway, i believe they had 10 bolts. if it was, i would pick it up just because it's only $25. going to measure it and might get it anyway. $25 for a locking 9 1/4 will allow me to spend $$$ on other things for a while before i blow it up.

    anyone happen to know total axle width, and spring perch width on a 76 power wagon?
    Logged
    I found the meaning of life once, but forgot to write it down.

    Offline Chryco Psycho

    • Administrator
    • C-C.com Guru
    • *****
    • Posts: 36620
    • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
    Re: rear end spool interchange question
    « Reply #5 on: December 04, 2004 - 01:26:05 PM »
    fi you can get Magic to work like that why not just conjure up a 71 Hemi Cuda Rag in the color you prefer  :dontknow:
    Logged

    Challenger - You`ll wish You Hadn`t
    Pages: [1]
    « previous next »