Author Topic: Radiator questions  (Read 587 times)

Offline 67vertman

  • Sr. Resident
  • ******
  • Posts: 5125
  • Member since 9-23-2005
Radiator questions
« on: March 06, 2011 - 03:13:47 PM »
I am updating my motor from a 318, with auto trans and AC with a 26" radiator, to a 440, 5sp with AC.

Can I use my 318 radiator, it was recently serviced so I would like to keep it.  I know that the big blocks have the upper and lower hoses on the same side.  And I know I can get a water pump that discharges to the passenger side.

So will it cool sufficiently? will the upper hose clear the ac unit?

if it won't work what radiator do you recommend?

Thanks.



Ron - Born and raised in Southern California

I got the 1970 Cuda, but still need the hot blonde to ride shotgun!

First car -1969 Road Runner 383 4sp

Current ride - 1970 Barracuda 440-6 4 sp Dana 60  (4:10)




Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: Radiator questions
« Reply #1 on: March 06, 2011 - 06:34:42 PM »
IT may work for you , the factory compressor sits on the right side , the aftermarket compressor sits on the left so the upper tank may have the inlet on the side you need , the water pump housing from different years can have either a left or right lower hose connection . The rad being 26" may well cool the 440 , is it s a 2 or 3 core rad?

Challenger - You`ll wish You Hadn`t

Offline 67vertman

  • Sr. Resident
  • ******
  • Posts: 5125
  • Member since 9-23-2005
Re: Radiator questions
« Reply #2 on: March 06, 2011 - 07:45:32 PM »
It's a three core Neil.  I saw that I can get a water pump with the hose on the passenger side, so I may give it a try.



Ron - Born and raised in Southern California

I got the 1970 Cuda, but still need the hot blonde to ride shotgun!

First car -1969 Road Runner 383 4sp

Current ride - 1970 Barracuda 440-6 4 sp Dana 60  (4:10)

Offline Topcat

  • C-C.com Expert
  • ********
  • Posts: 15376
  • Member since 9/16/04
Re: Radiator questions
« Reply #3 on: March 06, 2011 - 07:50:12 PM »
I had 2 radiators checked last year. If yours is out, get it checked at a radiator shop. They did it for free for me.
They can tell you if your old one is flowing at 100% or if it has any restrictions and check for any minor leaks.
Mike, Fremont, CA.


Offline 67vertman

  • Sr. Resident
  • ******
  • Posts: 5125
  • Member since 9-23-2005
Re: Radiator questions
« Reply #4 on: March 06, 2011 - 08:01:11 PM »
I had it serviced just a few months back  :2thumbs:......when I put a hole in it while I was redoing my grille and bumper.  :bricks1:



Ron - Born and raised in Southern California

I got the 1970 Cuda, but still need the hot blonde to ride shotgun!

First car -1969 Road Runner 383 4sp

Current ride - 1970 Barracuda 440-6 4 sp Dana 60  (4:10)

Offline Topcat

  • C-C.com Expert
  • ********
  • Posts: 15376
  • Member since 9/16/04
Re: Radiator questions
« Reply #5 on: March 06, 2011 - 08:13:20 PM »
I had it serviced just a few months back  :2thumbs:......when I put a hole in it while I was redoing my grille and bumper.  :bricks1:

Ooops!!  :misbehaving:

We learned that in the Army.
The 5 Ton radiators are mega bucks. W01 shop officer would have our hides if we put a hole in one.
Mike, Fremont, CA.