Author Topic: How to measure Torsion bar diameter  (Read 2021 times)

Offline willy

  • Jr. Member
  • **
  • Posts: 54
  • I'm a llama!
How to measure Torsion bar diameter
« on: March 09, 2011 - 05:37:28 PM »
I am assuming a pair of calipers to measure the tube diameter will give me my torsion bar size? ie...when refering to a ".098" torsion bar. Thanks in advance for answering....what a great site.




Offline Strawdawg

  • Resident
  • *****
  • Posts: 2209
    • Vortex Buicks
Re: How to measure Torsion bar diameter
« Reply #1 on: March 09, 2011 - 06:41:44 PM »
yes...except it would be closer to 0.98"   :)

Offline tommyg29

  • Resident
  • *****
  • Posts: 2706
Re: How to measure Torsion bar diameter
« Reply #2 on: March 09, 2011 - 07:18:47 PM »
I just tightened a crescent wrench on my front sway bar, then slid it off and measured it at 7/8" (.88) on a ruler.

Did the same with my torsion bar at about .96", give or take a few hundreths! Rulers are only so precise.
72 Roadrunner 400-4 Auto-3.23 Gear-Black Cruiser
71 Cuda 440-6 Tribute-Limelight-A833 Close Ratio-4 Sp-Pistol Grip-Dana 3.54 Powr Lok-Rally Dash-Shaker (Sold)
92 Dodge Stealth RT-Twin 15g Turbos-SAFC2 Tuned-Mystic Blue-5 Sp-AWD-Rear Wheel Steering-AutoX'r (Sold)
12 Dodge Charger SXT Plus Blacktop Package-3.6L-8 Sp-Leather-Nav (the wife's)

Multiple SRT's, Rams, Dakotas, Caravans and Neons

...the lines on the road just look like dots!....

Offline willy

  • Jr. Member
  • **
  • Posts: 54
  • I'm a llama!
Re: How to measure Torsion bar diameter
« Reply #3 on: March 09, 2011 - 09:39:03 PM »
thanks everyone....I am rebuilding my front end right now. The knowledge and the expertise in this section, from having a parts list to some upper end mod  benefits/ranking truly shows just how valuable and helpful this site is. LOVE IT.