440, 400, 8 ¾ rear ends - free delivery to Carlisle

Author Topic: 440, 400, 8 ¾ rear ends - free delivery to Carlisle  (Read 1210 times)

Offline Killer_Mopar

  • Sr. Member
  • ****
  • Posts: 1886
440, 400, 8 ¾ rear ends - free delivery to Carlisle
« on: July 05, 2011 - 03:26:08 PM »
I have a few parts to sell - not trying to get rich, just trying to get some of my money back and make some room. I can deliver everything at Carlisle and if you’re interested in more than one thing, I am willing to deal more. Sorry for the lousy pictures, if you want more pictures just let me know. Everything is OBO.

$200  - 1977 440 – Shortblock only (cam, rods, pistons, crank, block) cast crank engine, needs to be rebuilt….sold as a core.

$200 - 1972 400 longblock - has a thin dampener on the front and may be a forged crank engine, not sure and didn’t care because I was going to build a stroker out of it. Was told when I bought it that it ran strong and was pulled due to a blown transmission. I never opened it up and verified the condition of it. The engine has 346 heads on it and would make a great stroker engine, as the 72s are ‘supposed’ to be one of the better years.

$??? - Big block 727 – Needs to be rebuilt, but will make an excellent core….just don’t know what they are worth. Open to offers

$200 - 1970 Passenger’s fender – was rusty, but patched up and looks pretty good. Was done by professional bodyman and I have before pictures (need to find them). The fender has a filler primer on it, which is dirty from sitting on my car for a while. A good fender, but needs work to be perfect. Hope to post pictures *soon* but message me if you're interested.

SOLD – Ebody 8.75 rear end (housing, centersection, axles) – This is the rear end that was original to my car, only replaced it because I went with a B-body rear end. Worked perfectly when removed; it has a 489 case with 3.23 open gears.

$75 – Ebody 8.75 rear end (housing & axles) – I bought this as part of a complete rear end because I wanted the centersection. This is just the ebody housing and axles.

1970  Challenger hood – The hood is a flat hood that now has a fiberglass 6-pack hood scoop on it. The style of hood looks great; unfortunately the scoop does have an outline where it was installed. It will need some work done to it and be repainted. Hope to post pictures *soon* but message me if you're interested.
« Last Edit: February 02, 2012 - 08:55:04 PM by Killer_Mopar »
70 Challenger R/T SE - The never-ending project........




Offline 4Cruizn

  • Administrator
  • C-C.com Expert
  • *****
  • Posts: 18521
  • HEMI FISH
Re: 440, 400, 8 ¾ rear ends - free delivery to Carlisle
« Reply #1 on: July 05, 2011 - 04:02:12 PM »
I may be interested in the rear end . . . thinking about pulling out the dana and putting in something else.   :bigsmile:

Offline brads70

  • C-C.com Expert
  • ********
  • Posts: 18747
Re: 440, 400, 8 ¾ rear ends - free delivery to Carlisle
« Reply #2 on: July 05, 2011 - 05:51:40 PM »
I may be interested in the rear end . . . thinking about pulling out the dana and putting in something else.   :bigsmile:

Hummmm.... :popcorn:  I might be interested if your not?
Brad
1970 Challenger 451stroker/4L60 auto OD
Barrie,Ontario,Canada
Proud to own one of the best cars ever made!!!!!

My restoration thread 
http://www.cuda-challenger.com/cc/index.php?topic=59072.0
 My handling upgrade post
http://www.cuda-challenger.com/cc/index.php?topic=73985.0

Offline brads70

  • C-C.com Expert
  • ********
  • Posts: 18747
Re: 440, 400, 8 ¾ rear ends - free delivery to Carlisle
« Reply #3 on: July 05, 2011 - 05:54:43 PM »
Is the 727 have the e-body tailshaft?
Brad
1970 Challenger 451stroker/4L60 auto OD
Barrie,Ontario,Canada
Proud to own one of the best cars ever made!!!!!

My restoration thread 
http://www.cuda-challenger.com/cc/index.php?topic=59072.0
 My handling upgrade post
http://www.cuda-challenger.com/cc/index.php?topic=73985.0

Offline Killer_Mopar

  • Sr. Member
  • ****
  • Posts: 1886
Re: 440, 400, 8 ¾ rear ends - free delivery to Carlisle
« Reply #4 on: July 06, 2011 - 09:00:59 AM »
I may be interested in the rear end . . . thinking about pulling out the dana and putting in something else.   :bigsmile:

Just let me know Dave. I can take it to carlisle or possibly deliver it to your house when Im up your way.....

Is the 727 have the e-body tailshaft?

Not sure, I'll try to measure it tonight and get back to you
70 Challenger R/T SE - The never-ending project........

Offline brads70

  • C-C.com Expert
  • ********
  • Posts: 18747
Re: 440, 400, 8 ¾ rear ends - free delivery to Carlisle
« Reply #5 on: July 06, 2011 - 09:50:31 PM »
I'll take this ! I could ue some spare axels just in case? How will I find you at Carlisle?
$75 – Ebody 8.75 rear end (housing & axles) – I bought this as part of a complete rear end because I wanted the centersection. This is just the ebody housing and axles.
If you get this in time let me know how to find you. I'll bring my laptop to the hotel to check?
« Last Edit: July 06, 2011 - 10:12:37 PM by brads70 »
Brad
1970 Challenger 451stroker/4L60 auto OD
Barrie,Ontario,Canada
Proud to own one of the best cars ever made!!!!!

My restoration thread 
http://www.cuda-challenger.com/cc/index.php?topic=59072.0
 My handling upgrade post
http://www.cuda-challenger.com/cc/index.php?topic=73985.0

Offline Moparal

  • Permanent Resident
  • *******
  • Posts: 13085
Re: 440, 400, 8 ¾ rear ends - free delivery to Carlisle
« Reply #6 on: July 06, 2011 - 10:10:36 PM »
the 400 is a cast crank. If I had a way of getting it home, I'd buy it