Author Topic: Subtracted 1.5g from the bob weight  (Read 660 times)

Offline cudazappa

  • Full Member
  • ***
  • Posts: 709
Subtracted 1.5g from the bob weight
« on: October 04, 2011 - 01:56:56 PM »
Ok, for most of this year I've been building a 360.

I finally got to putting it together and noticed that my pistons were designed for Magnum rods and the rods I got were for LA pistons.

Of course I found this out after having the whole assembly balanced.

So I ended up machining the small end of the rods a little bit to get the clearance required (.030" on one side only) which translated to about 1.5g per rod.

I asked an engine builder and he said he would re-balance the assembly, but I kind of expected that answer because he does great work and has superior attention to detail.  (if only I could afford him!)

But I'm in the real world, don't really have the $$$ to spend on a rebalance, but I guess I would if I had to.  *sigh*

So soliciting second opinions on what would YOU do?

btw the combo:
KB362s
RHS heads with 2.02 intakes
Lunati 60402 cam
Eddy Air-Gap Intake
Holley SA 670
68-70 HiPo 340 Manifolds
tight converter, 3.23 gears, and 26" tall tires.
Max RPM about 5500-6000
Mostly street, lots of autocross
1971 Challenger - AutoX project
2015 Dart GT - Daily Driver




Offline PlumCraZRT

  • Full Member
  • ***
  • Posts: 631
    • My Challenger's Crappy Website
Re: Subtracted 1.5g from the bob weight
« Reply #1 on: October 04, 2011 - 03:23:12 PM »
So soliciting second opinions on what would YOU do?

Rebalance the assembly.  Driving around with an unbalanced assembly would be a disaster.
mmmmm.... Mopar.... *drool*

Offline brads70

  • C-C.com Expert
  • ********
  • Posts: 18747
Re: Subtracted 1.5g from the bob weight
« Reply #2 on: October 04, 2011 - 03:52:16 PM »
 :iagree:   better a few dollars now , than a scrap pile later?
Brad
1970 Challenger 451stroker/4L60 auto OD
Barrie,Ontario,Canada
Proud to own one of the best cars ever made!!!!!

My restoration thread 
http://www.cuda-challenger.com/cc/index.php?topic=59072.0
 My handling upgrade post
http://www.cuda-challenger.com/cc/index.php?topic=73985.0

Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: Subtracted 1.5g from the bob weight
« Reply #3 on: October 04, 2011 - 04:38:28 PM »
an unbalanced engine will not last nearly as long as a properly balanced one will But 1.5 grams in minute & maybe un-noticable

Challenger - You`ll wish You Hadn`t

Offline 72cudamaan

  • Resident
  • *****
  • Posts: 3248
Re: Subtracted 1.5g from the bob weight
« Reply #4 on: October 04, 2011 - 05:28:51 PM »
See what the shop that balanced it originally says.
They may give you a better deal since they did the work originally.
If I cant fix it, it's broke
 
Andy  (phukker whither)

Offline gkring

  • Full Member
  • ***
  • Posts: 825
Re: Subtracted 1.5g from the bob weight
« Reply #5 on: October 04, 2011 - 10:28:42 PM »
Oil allowance on a single rod is 4 grams,a dollar bill weighs one, and factory parts aren't within 5 grams of each other stock. I would not worry about it too much. A full rebalance costs $120 or so and maybe cheaper since all you really need to do is respin the crank assuming you have the old balance card and know the new change you made. Either way I wouldn't blame your decision. 
Greg
1970 Challenger convertible-in process
1970 Barracuda driver

Offline cudazappa

  • Full Member
  • ***
  • Posts: 709
Re: Subtracted 1.5g from the bob weight
« Reply #6 on: October 05, 2011 - 08:51:14 PM »
Thanks for the input.  I've decided to re-spin the crank.  *sigh*  While its already better than any stock balance, it really needs to be great.  I'm too far to half @$$ now...
1971 Challenger - AutoX project
2015 Dart GT - Daily Driver