Need Measurements for Windshield Trim Clips on 70 Challenger

[packnsix]

Does anyone have the measurements for the holes that the front and rear windshield clips screw into on a 70 Challenger? The channels around my front and rear window in my Challenger have been replaced and I need to know where to drill the holes for the trim mounting clips.

Thanks

[ksierens]

I can get them for you tonight if no one else replies.

[packnsix]

I can get them for you tonight if no one else replies.

Thanks it's greatly appreciated

[DAYLEY/CHALLENGER]

http://www.papadaveonline.com/imagegalleries/49/im000071.html

How about a pic........shows the approx places.....I will look for the back later..........

OK.....the back window but mine is an SE...................

[ksierens]

Sorry, I won't be able to get to it until the weekend.

[packnsix]

Daley, thanks for the pics. They give me a good idea where the clips need to be and if ksierens can get me the measurements I should be all set.

Thanks for the help

[ksierens]

Here is what I have.  I used a flexible scale and measured along the face of the channel. (The face that steps down from the roof)



From the Center line to D1 = 1 1/2"
From D1 to D2 = 8 3/4"
From D2 to D3 = 8 3/8"
From D3 to D4 = 7"
from D4 to D5 = 8"



From the Center line to P1 = 4 3/4"
From P1 to P2 = 8 3/4"
From P2 to P3 = 8 1/2"
From P3 to P4 = 7"
From P4 to P5 = 7 1/2"
From P5 to P6 = 7 1/4"

Hope it makes sense, if you have any questions, please ask.

[packnsix]

Ksierens, those pics are perfect. do you happen to have the rear window measurements?

[ksierens]

From the Center line to D1 = 2 3/4"
From D1 to D2 = 7 3/8"
From D2 to D3 = 7"
From D3 to D4 = 5 7/8"
From D4 to D5 = 6 5/8"
From D5 to D6 = 6 1/4"

From the quarter panel to D7 = 5 1/4"
From D7 to D8 = 3 5/8"
From D8 to D9 = 8"
From D9 to D10 = 7 1/2"



From the Center line to P1 = 3 1/8"
From P1 to P2 = 7 3/8"
From P2 to P3 = 7 1/4"
From P3 to P4 = 5"
From P4 to P5 = 6 7/8"
From P5 to P6 = 6 1/4"

From the quarter panel to P7 = 5 3/8"
From P7 to P8 = 3 3/4"
From P8 to P9 = 8"
From P9 to P10 = 7 1/2"

[Challenger III]

Great thread! It would be great if these dimensions would get posted in our reference section.
 http://www.cuda-challenger.com/cc/index.php?topic=62801.0