lca swaybar bracket

[72cudamaan]

O.k. so I'm attempting to make my own brackets for an e body. Does anybody have
a lca they could measure. I need to know how far above the jounce pad surface
 the swaybar bracket sits?  Is it terribly critical?

[brads70]

I got about 7/16" on the set I took off.

[72cudamaan]

Thanks Brad, I thought you might chime in. By the way, the scematic
you sent was cool. Thanks for that as well. I can't say that mine look
anywhere near as good looking as yours, but they will work.

[brads70]

Thanks Brad, I thought you might chime in. By the way, the scematic
you sent was cool. Thanks for that as well. I can't say that mine look
anywhere near as good looking as yours, but they will work.

Glad to pass it along, someone on here sent it to me too. Gotta love this forum! 

[Cuda Cody]

I just restored a couple sets.... I'll get some photos and measurements.  Stand by:

[Cuda Cody]

Let me know if this helps.... here's two sets, both factory 1970 Challengers.

[72cudamaan]

Wow, That's awesome Cody, Thanks.  Is that cosmoline?
You did a nice job on those.

[Cuda Cody]

Thanks.  The paint is 3 tones of different shades to make it look like Cosmoline. 

Good luck with your set!  I'm sure you'll do great.... post an update when you get them done.   

Wow, That's awesome Cody, Thanks.  Is that cosmoline?
You did a nice job on those.

[brads70]

Just for reference in case someone else needs it?

[72cudamaan]

Wow do I feel stupid. Brad, I used your pictures for reference, ground the 1/2 moons to clear
the rib on your lca. Then I looked at your's Cody. You don't have a rib. Then I looked at mine. DOH!
I sure am glad I didn't weld them on yet. I was looking at the wrong side. Don't even need the
notch on mine. Mine look just like Cody's ( only not as pretty). Thanks for all the pictures. Sure
would of looked stupid trying to hook up the swaybar behind the lca's   

[brads70]

Wow do I feel stupid. Brad, I used your pictures for reference, ground the 1/2 moons to clear
the rib on your lca. Then I looked at your's Cody. You don't have a rib. Then I looked at mine. DOH!
I sure am glad I didn't weld them on yet. I was looking at the wrong side. Don't even need the
notch on mine. Mine look just like Cody's ( only not as pretty). Thanks for all the pictures. Sure
would of looked stupid trying to hook up the swaybar behind the lca's   

Ya mine ( LCA's ) are A-Body

[Chryco Psycho]

Nice Work Cody !! , they look awesome 
 usually better to weld the tabs on the front side LOL 

[BIGSHCLUNK]

Cody, those are some great looking LCA'S!!! Well done.